D-Link DXS-3600 Series Reference Manual page 106

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to specify an AAA authentication method list for the authentication of the HTTP
server users. Use the no form of the command to reset to use the default method list.
ip http authentication aaa login-authentication {default | METHOD-LIST}
no ip http authentication aaa login-authentication
Parameters
default
METHOD-LIST
Default
By default, this default option is used.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
For authentication via the method list to take effect, enable AAA first by using the aaa new-model
command. Create the method list first by using the aaa authentication login command. If the method list
does not exist, the command does not take effect, and the authentication will be done via the default login
method list.
Example
This example shows how to configure HTTP sessions to use the method list "WEB-METHOD" for login
authentication.
Switch# configure terminal
Switch(config)# aaa authentication login WEB-METHOD group group2 local
Switch(config)# ip http authentication aaa login-authentication WEB-METHOD
Switch(config)#
7-17 ip http accounting exec
This command is used to specify an AAA accounting method for HTTP server users. Use the no form of
the command to reset to the default setting.
ip http accounting exec {default | METHOD-LIST}
no ip http accounting exec
Parameters
default
METHOD-LIST
Default
By default, this option is disabled.
Specifies to authenticate based on the default method list.
Specifies the name of the method list to use.
Specifies to do accounting based on the default method list.
Specifies the name of the method list to use.
106