Show Ipv6 Ospf Interface - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Flags: 0x03 (-|-|E|B)
Options: 0x000013 (-|R|-|-|E|V6)
Number of Links: 2
Link connected to: a Virtual Link
Metric: 1
Interface ID: 2147483809
Neighbor Interface ID: 2147483649
Neighbor Router ID: 10.47.65.182
Link connected to: a Virtual Link
Metric: 1
Interface ID: 2147483810
Neighbor Interface ID: 2147483649
Neighbor Router ID: 10.47.65.183
Total Entries: 1
Switch#
72-24

show ipv6 ospf interface

This command is used to display OSPF-related interface information.
show ipv6 ospf interface [INTERFACE-ID]
Parameters
INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Both of these keywords can be appended to all other keywords used with the show ipv6 ospf interface
command to provide all interfaces' information.
Example
This example shows how to display OSPF-related interface information.
Switch# show ipv6 ospf interface
vlan2 is up, line protocol is up
Link Local Address: fe80::a01:2ff:fe36:2/64
Interface ID 1026
OSPFv3 Process (1), Area 0.0.0.1 (active)
(Optional) Specifies the interface ID to display the OSPF information. If
no interface ID is specified, the OSPF information on all interfaces will
be displayed.
881