D-Link DXS-3600 Series Reference Manual page 778

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
SessionRejectedAdErrors
SessionRejectedMaxPduErrors
SessionRejectedLRErrors
BadLdpIdentifierErrors
BadPduLengthErrors
BadMessageLengthErrors
BadTlvLengthErrors
MalformedTlvValueErrors
KeepAliveTimerExpErrors
ShutdownReceivedNotifications:
ShutdownSentNotifications
Switch#
67-41 show mpls lsp trigger
This command is used to display MPLS LSP trigger filter rule(s).
show mpls lsp trigger [SN]
Parameters
SN
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display MPLS LSP trigger filter rule(s).
Example
This example shows how to display all MPLS LSP trigger filter rules.
Switch# show mpls lsp trigger
SN Prefix FEC
----- --------------
10 192.1.1.0/24
20 Any
Total Entries : 2
Switch#
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
0
: 0
(Optional) Specifies the sequence number of the MPLS LSP trigger
filter rule to be displayed. If not specified, all rules will be displayed.
Action
--------
Permit
Deny
778