D-Link DXS-3600 Series Reference Manual page 488

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Admin Port1: none
Operational Port1:none
Port1 State:-
Admin RPL Port : Port0
Operational RPL Port : Port0
Total Entries: 2
Switch#
Display Parameters
MEL
R-APS Channel
Protected VLANs
Profile
Guard timer
Hold-Off timer
WTR timer
TC propagation/No TC
Propagation
Revertive/Non-Revertive
Instance State
Admin/Operational RPL
Admin/Operational
Port0/port1
Admin/Operational RPL Port
Ring port0/port1 state
Example
This example shows how to display instance information of all created ERPS domains.
Switch# show ethernet ring g8032 brief
Profile
-------------- --------
Campus
P1: eth3/0/3,Forwarding
Campus
P1: -
Corportate
Total Entries: 3
The ring MEL value of the ERP instance.
The APS channel of the ERP instance.
The service protected VLANs of the ERP instance.
The profile associated with the ERP instance.
The time value for the guard timer of the profile.
The time value for the hold-off timer of the profile.
The time value for the WTR timer of the profile.
TC is propagated or not propagated in the profile.
The ring instance is operated revertively or non-revertively in the
profile.
The current ring node status of ERP instance. Deactivated / Init / Idle /
Protection.
The current configuration or running configuration ring node role of
ERPS instance. (Owner/None)
The current configuration or running configuration ring port role.
(Interface ID/none)
The current configuration or running RPL. (port0/port1/none)
The state for ring ports of the ERP instance.
( - / Forwarding / Blocked l)
Inst ID Status
---------
1 Idle
2 Protection
3 Deactivated
488
Port-State
------------------
P0: eth3/0/1,Blocked (RPL)
P0: eth3/0/3,Blocked
P0: -
P1: -