1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. DXS-3600 Series
  6. Reference manual

D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabit ethernet switch web ui reference guide
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Cli Reference Manual
1

Advertisement

Table of Contents
loading

Related Manuals for D-Link DXS-3600 Series

Summary of Contents for D-Link DXS-3600 Series

  • Page 2 Information in this document is subject to change without notice. Reproduction of this document in any manner, without the written permission of the D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of the D-Link Corporation; Microsoft and Windows are registered trademarks of the Microsoft Corporation.

  • Page 3: Table Of Contents

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Table of Contents Introduction ................................... 1 Audience .................................... 1 Other Documentation ................................. 1 Conventions ..................................1 Notes, Notices, and Cautions ............................1 Web-based Switch Configuration ..........................3 Management Options ................................. 3 Connecting using the Web User Interface .........................
  • Page 4 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide VLAN Interface ................................35 Subnet VLAN ................................39 Private VLAN ................................40 Spanning Tree ................................. 41 STP Global Settings ..............................41 STP Port Settings ............................... 43 MST Configuration Identification ..........................45 STP Instance ................................
  • Page 5 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Extend IP ACL ................................81 Standard IPv6 ACL ..............................101 Extend IPv6 ACL ..............................105 Extend MAC ACL ..............................117 Expert ACL................................120 ACL Interface Access Group ............................147 ACL VLAN Access Map ..............................

  • Page 6: Introduction

    Web User Interface (Web UI). The Web UI is the secondary management interface to the DXS-3600 Series switch, which will be generally be referred to simply as the “switch” within this manual. This manual is written in a way that assumes that you already have the experience and knowledge of Ethernet and modern networking principles for Local Area Networks.
  • Page 7 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide NOTE: A note indicates important information that helps you make better use of your device. NOTICE: A notice indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

  • Page 8: Web-Based Switch Configuration

    Opera (version 12 and later), or Netscape (version 8 and later). Connecting using the Web User Interface Most software functions of the DXS-3600 Series switches can be managed, configured and monitored via the embedded web-based (HTML) interface. Manage the switch from remote stations anywhere on the network through a standard web browser.

  • Page 9: Web User Interface (Web Ui)

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide NOTE: The default IP address of this switch is 10.90.90.90, with a subnet mask of 255.0.0.0. Figure 2-1 Displays entering the IP address in Internet Explorer This will open the user authentication window, as seen below.
  • Page 10 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide AREA 2 AREA 1 AREA 3 Figure 2-3 Main Web UI Window Area Number Description AREA 1 In this area, a folder tree layout is displayed of functions that can be configured using the Web UI.

  • Page 11: System

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide System Device Information Port Configuration System Log Time Profile Device Information On this page, the Device Information, Temperature status, CPU, Usage status, System Log, Fan status, and Memory usage status are displayed. It appears automatically when you log on to the switch. To return to the Device Information window after viewing other windows, click the DXS-3600-32S link.

  • Page 12: Temperature Status

    The temperature of the switch is mainly influenced by two factors: (1) the environment, and (2) the internal air-flow of the switch. In the DXS-3600 Series Hardware Installation Guide, there are some guidelines that can assist the user with the installation of this switch in a temperature friendly environment.

  • Page 13: Cpu Status

    In the CPU section, the user can view a real-time display of the switch’s CPU usage. There are a number of factors that can influence a depleted CPU usage. One of those factors is network broadcasts. In the DXS-3600 Series CLI Reference Guide there is an abundance of features that can be enabled to prevent this problem from occurring.

  • Page 14: System Log Entries

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 3-4 CPU Status Window In the CPU section, the following display parameters are available: Parameter Description Percentage Display In this graphic, the reading is divided into percentage sections. This area ranges from 0% to 100%.
  • Page 15 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 3-5 System Log Window In the System Log section, the following display parameters are available: Parameter Description Entry Number Every log entry has a specific entry number, generated when the log entry was added to the System log entry display.

  • Page 16: Fan Status

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 3-6 System Log (More) Window Click the Close button to exit the larger display. Fan Status In the Fan section, the user can view a real-time display of the switch’s fan(s) status. A maximum of 3 fans can be installed in this switch.

  • Page 17: Flash, Sd Card, And Memory Status

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide In the Fan section, the following display parameters are available: Parameter Description Fan Number At the top of this graphic, the list of installed fans is displayed. After clicking on any specific fan icon, the real-time RPM gauge of that fan will be displayed.

  • Page 18: Port Configuration

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Port Configuration Port Settings On this page, users can view and configure the switch’s port settings. To view the following window, click System > Port Configuration > Port Settings, as shown below:...

  • Page 19: Port Status

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Flow Control Select to either turn flow control On or Off here. Ports configured for full-duplex use 802.3x flow control, half-duplex ports use back- pressure flow control, and Auto ports use an automatic selection of the two.

  • Page 20: Port Auto Negotiation

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 3-10 Port Status Window Port Auto Negotiation On this page, users can view detailed port auto-negotiation information. To view the following window, click System > Port Configuration > Port Auto Negotiation, as shown below:...

  • Page 21: Jumbo Frame

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Jumbo Frame On this page, users can view and configure the Jumbo Frame size and settings. The switch supports jumbo frames. Jumbo frames are Ethernet frames with more than 1,518 bytes of payload. The switch supports jumbo frames with a maximum frame size of up to 12288 bytes.
  • Page 22 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 3-13 System Log Settings Window The fields that can be configured for Global State are described below: Parameter Description Source Interface State Select this option to enable or disable the source interface’s global state.

  • Page 23: System Log Discriminator Settings

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Infinite option, to disable the write delay feature. Click the Apply button to accept the changes made. The fields that can be configured for Console Log Settings are described below:...

  • Page 24: System Log Server Settings

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 3-14 System Log Discriminator Settings Window The fields that can be configured are described below: Parameter Description Discriminator Enter the discriminator name here. This name can be up to 15 characters long.

  • Page 25: System Log

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide characters long. VRF Name Enter the VRF name, that will be associated with this configuration, here. Click the Apply button to accept the changes made. Click the Delete button to delete the specified entry.
  • Page 26 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 3-18 Time Profile Window The fields that can be configured are described below: Parameter Description Range Name Enter the time profile’s range name here. This name can be up to 32 characters long.

  • Page 27: Management

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Management User Account Settings User Account Settings On this page, user accounts can be created and configured. Also on this page active user account sessions can be viewed.
  • Page 28 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 4-2 Session Table Window On this page, a list of active user account session will be displayed.

  • Page 29: Layer 2 Features

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Layer 2 Features VLAN Spanning Tree Link Aggregation L2 Protocol Tunnel L2 Multicast Control Static FDB Unicast Static FDB On this page, users can view and configure the static unicast forwarding settings on the switch. To view the following window, click L2 Features >...

  • Page 30: Mac Address Table Settings

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 5-2 Multicast Static FDB Window The fields that can be configured are described below: Parameter Description From Port ~ To Port Select the range of ports that will be used for this configuration here.

  • Page 31: Mac Address Table

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 5-4 MAC Address Table Settings (MAC Address Learning) Window The fields that can be configured are described below: Parameter Description From Port ~ To Port Select the range of ports that will be used for this configuration here.

  • Page 32: Mac Notification

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Port Select the port that will be used for this configuration here. VLAN ID Enter the VLAN ID that will be used for this configuration here. MAC Address Enter the MAC address that will be used for this configuration here.

  • Page 33: Vlan

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide value is 1. MAC Notification Trap State Select to enable or disable the MAC notification trap state. From Port ~ To Port Select the range of ports that will be used for this configuration here.

  • Page 34: 802.1V Protocol Vlan

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Click the Edit button to re-configure the specific entry. 802.1v Protocol VLAN Protocol VLAN Profile On this page, users can view and configure 802.1v protocol VLAN profiles. The 802.1v Protocol VLAN Group Settings support multiple VLANs for each protocol and allows the user to configure the untagged ports of different protocols on the same physical port.

  • Page 35: Gvrp

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 5-10 Protocol VLAN Profile Interface Window The fields that can be configured are described below: Parameter Description Port Select the port that will be used for this configuration here.
  • Page 36 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide GVRP Port On this page, users can view and configure the GVRP port settings. To view the following window, click L2 Features > VLAN > GVRP > GVRP Port, as shown below:...
  • Page 37 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 5-13 GVRP Advertise VLAN Window The fields that can be configured are described below: Parameter Description From Port ~ To Port Select the range of ports that will be used for this configuration here.
  • Page 38 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 5-14 GVRP Forbidden VLAN Window The fields that can be configured are described below: Parameter Description Unit Select the switch unit that will be used for this configuration here.

  • Page 39: Mac Vlan

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 5-15 GVRP Statistics Table Window The fields that can be configured are described below: Parameter Description Port Select the port number of which GVRP statistic information will be displayed.

  • Page 40: Vlan Interface

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide MAC Address Enter the unicast MAC address. VLAN ID Enter the VLAN ID that will be used. Priority Select the priority that is assigned to untagged packets. This value is between 0 and 7.
  • Page 41 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide On this page, more detailed information about the VLAN of the specific interface is displayed. Click the <<Back button to return to the previous page. After click the Edit button, the following page will appear. This is a dynamic page that will change when a different VLAN Mode was selected.
  • Page 42 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, and Host. Acceptable Frame Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All.
  • Page 43 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Click the Apply button to accept the changes made. Click the <<Back button to discard the changes made and return to the previous page. When 802.1Q-Tunnel was selected as the VLAN Mode, the following page will appear.

  • Page 44: Subnet Vlan

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Parameter Description VLAN Mode Select the VLAN mode option here. Options to choose from are Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, and Host. Acceptable Frame Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All.

  • Page 45: Private Vlan

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description IPv4 Network Prefix / Prefix Select and enter the IPv4 address and prefix length value for the Length subnet VLAN here.

  • Page 46: Spanning Tree

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide to choose from are Add, Remove, and Disabled. Secondary VLAN ID List Enter the secondary private VLAN ID here. Click the Apply button to accept the changes made.
  • Page 47 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 5-27 STP Global Settings Window The field that can be configured for Spanning Tree State is described below: Parameter Description Spanning Tree State Select to enable or disable the STP global state here.

  • Page 48: Stp Port Settings

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide 2 seconds. This is the interval between two transmissions of BPDU packets sent by the Root Bridge to tell all other switches that it is indeed the Root Bridge. This field will only appear here when STP or RSTP is selected for the STP Version.
  • Page 49 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description From Port ~ To Port Select the range of ports that will be used for this configuration here.

  • Page 50: Mst Configuration Identification

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide MST Configuration Identification On this page, users can view and configure the MST configuration identification settings. These settings will uniquely identify a multiple spanning tree instance set on the switch. The switch initially possesses one CIST, or Common Internal Spanning Tree, of which the user may modify the parameters for but cannot change the MSTI ID for, and cannot be deleted.

  • Page 51: Stp Instance

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide STP Instance On this page, users can view and configure the STP instance settings. To view the following window, click L2 Features > Spanning Tree > STP Instance, as shown below: Figure 5-30 STP Instance Window Click the Edit button to re-configure the specific entry.
  • Page 52 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 5-32 Example of Port Trunk Group The switch treats all ports in a trunk group as a single port. Data transmitted to a specific host (destination address) will always be transmitted over the same port in a trunk group. This allows packets in a data stream to arrive in the same order they were sent.
  • Page 53 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide configured on the Switch, STP will block one entire group; in the same way STP will block a single port that has a redundant link. NOTE: If any ports within the trunk group become disconnected, packets intended for the disconnected port will be load shared among the other linked ports of the link aggregation group.

  • Page 54: L2 Protocol Tunnel

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide members or LACP members. Once the type of channel group has been determined, other types of interfaces cannot join the channel group. Click the Apply button to accept the changes made.
  • Page 55 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The fields that can be configured for L2 Protocol Tunnel Global Settings are described below: Parameter Description CoS for Encapsulated Select the CoS value for encapsulated packets here. This value is Packets between 0 and 7.

  • Page 56: L2 Multicast Control

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide L2 Multicast Control Multicast Filtering On this page, users can view and configure the Layer 2 multicast filtering settings. To view the following window, click L2 Features > L2 Multicast Control > Multicast Filtering, as shown below:...

  • Page 57: Layer 3 Features

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Layer 3 Features Gratuitous ARP IPv4 Interface IPv4 Static/Default Route IPv4 Route Table IPv6 Interface IPv6 Static/Default Route IPv6 Route Table ARP Aging Time On this page, users can view and configure the ARP aging time settings. To view the following window, click L3 Features >...

  • Page 58: Proxy Arp

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Parameter Description VRF Name Enter the Virtual Routing and Forwarding (VRF) instance name used here. This name can be up to 12 characters long. IP Address Enter the IP address that will be associated with the MAC address here.

  • Page 59: Gratuitous Arp

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 6-4 ARP Table Window The fields that can be configured are described below: Parameter Description VRF Name Enter the Virtual Routing and Forwarding (VRF) instance name used here.

  • Page 60: Ipv4 Interface

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 6-5 Gratuitous ARP Window The fields that can be configured are described below: Parameter Description IP Gratuitous ARP State Select to enable or disable the learning of gratuitous ARP packets in the ARP cache table.

  • Page 61: Ipv4 Static/Default Route

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 6-7 IPv4 Interface (Edit) Window The fields that can be configured are described below: Parameter Description State Select to enable or disable the IPv4 interface’s global state.

  • Page 62: Ipv4 Route Table

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 6-8 IPv4 Static/Default Route Window The fields that can be configured are described below: Parameter Description VRF Name Enter the VRF instance name used here. This name can be up to 12 characters long.

  • Page 63: Ipv6 Interface

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Network Address Enter the IPv4 network address here. In the first space enter the network prefix and in the second space enter the network mask.

  • Page 64: Ipv6 Static/Default Route

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 6-11 IPv6 Interface (Detail, IPv6 Interface Settings) Window The fields that can be configured for Interface are described below: Parameter Description IPv6 State Select to enable or disable the IPv6 interface’s global state here.

  • Page 65: Ipv6 Route Table

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 6-13 IPv6 Static/Default Route Window The fields that can be configured are described below: Parameter Description Network Prefix/Prefix Length Enter the IPv6 address and prefix length for this route here. Tick the Default Route option to use the default route as the IPv6 address.
  • Page 66 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide specific routes. IPv6 Address Enter the IPv6 address to display here. Interface VLAN Enter the interface’s VLAN ID to display here. RIPng Select this option to display only RIPng routes.

  • Page 67: Quality Of Service (Qos)

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Quality of Service (QoS) Basic Settings Advanced Settings Basic Settings Port Default CoS On this page, users can view and configure the port’s default CoS settings. To view the following window, click QoS >...
  • Page 68 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 7-2 Port Scheduler Method Window The fields that can be configured are described below: Parameter Description From Port ~ To Port Select the range of ports that will be used for this configuration here.

  • Page 69: Queue Settings

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide condition happens, the credits are replenished. When the credits are replenished, a quantum of credits are added to each CoS queue credit counter. The quantum for each CoS queue may be different based on the user configuration.

  • Page 70: Cos To Queue Mapping

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide and 127. Click the Apply button to accept the changes made. CoS to Queue Mapping On this page, users can view and configure the CoS-to-Queue mapping settings. To view the following window, click QoS >...

  • Page 71: Queue Rate Limiting

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 7-5 Port Rate Limiting Window The fields that can be configured are described below: Parameter Description From Port ~ To Port Select the range of ports that will be used for this configuration here.

  • Page 72: Advanced Settings

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description From Port ~ To Port Select the range of ports that will be used for this configuration here.

  • Page 73: Port Trust State And Mutation Binding

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 7-7 DSCP Mutation Map Window The fields that can be configured are described below: Parameter Description Mutation Name Enter the DSCP mutation map name here. This name can be up to 32 characters long.

  • Page 74: Dscp Cos Mapping

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 7-8 Port Trust State and Mutation Binding Window The fields that can be configured are described below: Parameter Description From Port ~ To Port Select the range of ports that will be used for this configuration here.

  • Page 75: Cos Color Mapping

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide CoS Color Mapping On this page, users can view and configure the CoS color mapping settings. To view the following window, click QoS > Advanced Settings > CoS Color Mapping, as shown below:...

  • Page 76: Class Map

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 7-11 DSCP Color Mapping Window The fields that can be configured are described below: Parameter Description From Port ~ To Port Select the range of ports that will be used for this configuration here.
  • Page 77 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Multiple Match Criteria Select the multiple match criteria option here. Options to choose from are Match All and Match Any. Click the Apply button to accept the changes made.

  • Page 78: Aggregate Policer

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Aggregate Policer On this page, users can view and configure the aggregate policer settings. To view the following window, click QoS > Advanced Settings > Aggregate Policer, as shown below:...
  • Page 79 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide new IP DSCP value. When selecting the Set-1P-Transmit option, enter the 1P transmit value in the space provided. This value sets the 802.1p value and transmits the packet with the new value.
  • Page 80 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Parameter Description Aggregate Policer Name Enter the aggregate policer’s name here. Enter the Committed Information Rate (CIR) value here. This value must be between 0 and 10000000 kbps. The committed packet rate is the first token bucket for the two-rate metering.

  • Page 81: Policy Map

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide are Drop, Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and Set- DSCP-1P. When selecting the Drop option, the packet will be dropped. When selecting the Set-DSCP-Transmit option, enter the IP DSCP value in the space provided. This value sets the IP differentiated services code point (DSCP) value and transmits the packet with the new IP DSCP value.

  • Page 82: Policy Binding

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide characters long. Class Map Name Enter the class map’s name here. This name can be up to 32 characters long. Click the Apply button to accept the changes made.

  • Page 83: Access Control List (Acl)

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Access Control List (ACL) ACL Access List ACL Interface Access Group ACL VLAN Access Map ACL VLAN Filter ACL Access List On this page, users can view and configure the ACL access list settings. To view the following window, click ACL >...
  • Page 84 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description ACL Type Select the ACL profile type here. Options to choose from are Standard IP ACL, Extend IP ACL, Standard IPv6 ACL, Extend IPv6 ACL, Extend MAC ACL, and Expert ACL.
  • Page 85 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-5 Standard IP ACL (Add Rule) Window The fields that can be configured are described below: Parameter Description Rule Number Enter the ACL rule number here. This value must be between 1 and 65535.

  • Page 86: Extend Ip Acl

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-6 Standard IP ACL (Counter State Enabled) Window The fields that can be configured are described below: Parameter Description Start Sequence No. Enter the start sequence number here.
  • Page 87 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-8 Extend IP ACL (Add Profile) Window The fields that can be configured are described below: Parameter Description ACL Type Select the ACL profile type here. Options to choose from are Standard IP ACL, Extend IP ACL, Standard IPv6 ACL, Extend IPv6 ACL, Extend MAC ACL, and Expert ACL.
  • Page 88 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-10 Extend IP ACL (Selected) Window After selecting the ACL profile and clicking the Add Rule button, users can configure the new ACL rule, in the selected ACL profile, as shown below: Figure 8-11 Extend IP ACL (Add Rule) Window This is a dynamic page.
  • Page 89 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Protocol Type Select the protocol type option here. Options to choose from are TCP, UDP, ICMP, EIGRP, ESP, GRE, IGMP, OSPF, PIM, VRRP, IP-in-IP, PCP, Protocol ID, and None.
  • Page 90 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide ports greater than the selected port, will be used. When selecting the < option, all ports smaller than the selected port, will be used. When selecting the ≠ option, all ports, excluding the selected port, will be used.
  • Page 91 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-13 Extend IP ACL (Add Rule) UDP Window The dynamic fields that can be configured are described below: Parameter Description Source Select and enter the source information here. Options to choose from are Any, Host, IP, and Wildcard.
  • Page 92 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide specific selected port number will be used. When selecting the > option, all ports greater than the selected port, will be used. When selecting the < option, all ports smaller than the selected port, will be used.
  • Page 93 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide address here. When the IP option is selected, the Wildcard option will also be available. Enter the group of source IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored.
  • Page 94 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-15 Extend IP ACL (Add Rule) EIGRP Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 95 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-16 Extend IP ACL (Add Rule) ESP Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 96 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide After selecting the GRE option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-17 Extend IP ACL (Add Rule) GRE Window...
  • Page 97 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide here. After selecting the IGMP option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-18 Extend IP ACL (Add Rule) IGMP Window...
  • Page 98 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide DSCP Select or enter the DSCP value used here. This value must be between 0 and 63. Time Range Enter the time profile name that will be associated with this ACL rule, here.
  • Page 99 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide delay), 9, 10, 11, 12, 13, 14, and 15. Select the Type of Service option here. Options to choose from are 0 to 15. DSCP Select or enter the DSCP value used here. This value must be between 0 and 63.
  • Page 100 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide precedence value, select the Type-of-Service (ToS) value that will be used here. Options to choose from are 0 (normal), 1 (min-monetary- cost), 2 (max-reliability), 3, 4 (max-throughput), 5, 6, 7, 8 (min- delay), 9, 10, 11, 12, 13, 14, and 15.
  • Page 101 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide IP Precedence Select the IP precedence value used here. Options to choose from are 0 (routine), 1 (priority), 2, (immediate), 3 (flash), 4 (flash-override), 5 (critical), 6 (internet), and 7 (network). After selecting the IP precedence value, select the Type-of-Service (ToS) value that will be used here.
  • Page 102 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide IP addresses by using a wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked.
  • Page 103 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide conditions of this rule. When the Host option is selected, enter the destination host’s IP address here. When the IP option is selected, the Wildcard option will also be available. Enter the group of destination IP addresses by using a wildcard bitmap.
  • Page 104 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide wildcard bitmap. The bit corresponding to the bit value 1 will be ignored. The bit corresponding to the bit value 0 will be checked. Destination Select and enter the destination information here. Options to choose from are Any, Host, IP, and Wildcard.
  • Page 105 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide rule. When the Host option is selected, enter the source host’s IP address here. When the IP option is selected, the Wildcard option will also be available. Enter the group of source IP addresses by using a wildcard bitmap.

  • Page 106: Standard Ipv6 Acl

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Stop Enter the stop sequence number here. Counter State Select to enable or disable the counter state option here. Remark Enter an optional remark that will be associated with this profile here.
  • Page 107 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide After creating a Standard IPv6 ACL profile, the newly created Standard IPv6 ACL profile will be displayed in the ACL profile display table, as shown below: Figure 8-29 Standard IPv6 ACL (Main) Window Click the Edit button to re-configure the specific ACL profile.
  • Page 108 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-31 Standard IPv6 ACL (Add Rule) Window The fields that can be configured are described below: Parameter Description Rule Number Enter the ACL rule number here. This value must be between 1 and 65535.
  • Page 109 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-32 Standard IPv6 ACL (Counter State Enabled) Window The fields that can be configured are described below: Parameter Description Start Sequence No. Enter the start sequence number here.

  • Page 110: Extend Ipv6 Acl

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Extend IPv6 ACL After clicking the Add ACL button, users can create a new ACL profile, as shown below: Figure 8-34 Extend IPv6 ACL (Add Profile) Window The fields that can be configured are described below:...
  • Page 111 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-36 Extend IPv6 ACL (Selected) Window After selecting the ACL profile and clicking the Add Rule button, users can configure the new ACL rule, in the selected ACL profile, as shown below: Figure 8-37 Extend IPv6 ACL (Add Rule) Window This is a dynamic page.
  • Page 112 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide are Permit and Deny. Protocol Type Select the protocol type option here. Options to choose from are TCP, UDP, ICMP, Protocol ID, ESP, PCP, SCTP, and None. After selecting the TCP option as the Protocol Type, the following page and parameters will be available,...
  • Page 113 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide used. When selecting the Range option, the start port number and end port number selected, of the range, will be used. Alternatively, the port number(s) can manually be entered in the space(s) provided, if the port number(s) is/are not available in the drop-down list.
  • Page 114 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Source Select and enter the source information here. Options to choose from are Any, Host, IPv6, and Prefix Length. When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule.
  • Page 115 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-40 Extend IPv6 ACL (Add Rule) ICMP Window The dynamic fields that can be configured are described below: Parameter Description Source Select and enter the source information here. Options to choose from are Any, Host, IPv6, and Prefix Length.
  • Page 116 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide After selecting the Protocol ID option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-41 Extend IPv6 ACL (Add Rule) Protocol ID Window...
  • Page 117 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-42 Extend IPv6 ACL (Add Rule) ESP Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 118 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-43 Extend IPv6 ACL (Add Rule) PCP Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 119 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-44 Extend IPv6 ACL (Add Rule) SCTP Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 120 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-45 Extend IPv6 ACL (Add Rule) None Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 121 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-46 Extend IPv6 ACL (Counter State Enabled) Window The fields that can be configured are described below: Parameter Description Start Sequence No. Enter the start sequence number here.

  • Page 122: Extend Mac Acl

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Extend MAC ACL After clicking the Add ACL button, users can create a new ACL profile, as shown below: Figure 8-48 Extend MAC ACL (Add Profile) Window The fields that can be configured are described below:...
  • Page 123 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-50 Extend MAC ACL (Selected) Window After selecting the ACL profile and clicking the Add Rule button, users can configure the new ACL rule, in the selected ACL profile, as shown below:...
  • Page 124 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide will also be available. Enter the source MAC address and wildcard value in the spaces provided. Destination Select and enter the destination information here. Options to choose from are Any, Host, MAC, and Wildcard. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule.

  • Page 125: Expert Acl

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Start Sequence No. Enter the start sequence number here. Stop Enter the stop sequence number here. Counter State Select to enable or disable the counter state option here.
  • Page 126 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Parameter Description ACL Type Select the ACL profile type here. Options to choose from are Standard IP ACL, Extend IP ACL, Standard IPv6 ACL, Extend IPv6 ACL, Extend MAC ACL, and Expert ACL.
  • Page 127 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide After selecting the ACL profile and clicking the Add Rule button, users can configure the new ACL rule, in the selected ACL profile, as shown below: Figure 8-57 Expert ACL (Add Rule) Window This is a dynamic page.
  • Page 128 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-58 Expert ACL (Add Rule) TCP Window The dynamic fields that can be configured are described below: Parameter Description Source IP Address Select and enter the source information here. Options to choose from are Any, Host, IP, and Wildcard.
  • Page 129 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide from are Any, Host, MAC, and Wildcard. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host’s MAC address here.
  • Page 130 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-59 Expert ACL (Add Rule) UDP Window The dynamic fields that can be configured are described below: Parameter Description Source IP Address Select and enter the source information here. Options to choose from are Any, Host, IP, and Wildcard.
  • Page 131 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide selected, any destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host’s MAC address here. When the MAC option is selected, the Wildcard option will also be available.
  • Page 132 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-60 Expert ACL (Add Rule) ICMP Window The dynamic fields that can be configured are described below: Parameter Description Source IP Address Select and enter the source information here. Options to choose from are Any, Host, IP, and Wildcard.
  • Page 133 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide destination host’s MAC address here. When the MAC option is selected, the Wildcard option will also be available. Enter the destination MAC address and wildcard value in the spaces provided.
  • Page 134 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-61 Expert ACL (Add Rule) EIGRP Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 135 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide selected, the Wildcard option will also be available. Enter the destination MAC address and wildcard value in the spaces provided. IP Precedence Select the IP precedence value used here. Options to choose from are 0 (routine), 1 (priority), 2, (immediate), 3 (flash), 4 (flash-override), 5 (critical), 6 (internet), and 7 (network).
  • Page 136 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Fragments Select the Fragments option to include packet fragment filtering. Source IP Address Select and enter the source information here. Options to choose from are Any, Host, IP, and Wildcard. When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule.
  • Page 137 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide After selecting the GRE option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-63 Expert ACL (Add Rule) GRE Window...
  • Page 138 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide from are Any, Host, MAC, and Wildcard. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host’s MAC address here.
  • Page 139 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering. Source IP Address Select and enter the source information here. Options to choose from are Any, Host, IP, and Wildcard.
  • Page 140 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Time Range Enter the time profile name that will be associated with this ACL rule, here. After selecting the OSPF option as the Protocol Type, the following page and parameters will be...
  • Page 141 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide value in the spaces provided. Destination MAC Address Select and enter the destination information here. Options to choose from are Any, Host, MAC, and Wildcard. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule.
  • Page 142 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-66 Expert ACL (Add Rule) PIM Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 143 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Inner CoS Select the inner Class of Service (CoS) value here. Options to choose from are from 0 to 7. Time Range Enter the time profile name that will be associated with this ACL rule, here.
  • Page 144 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide rule. When the Host option is selected, enter the source host’s MAC address here. When the MAC option is selected, the Wildcard option will also be available. Enter the source MAC address and wildcard value in the spaces provided.
  • Page 145 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-68 Expert ACL (Add Rule) IP-in-IP Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 146 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide selected, the Wildcard option will also be available. Enter the destination MAC address and wildcard value in the spaces provided. IP Precedence Select the IP precedence value used here. Options to choose from are 0 (routine), 1 (priority), 2, (immediate), 3 (flash), 4 (flash-override), 5 (critical), 6 (internet), and 7 (network).
  • Page 147 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Fragments Select the Fragments option to include packet fragment filtering. Source IP Address Select and enter the source information here. Options to choose from are Any, Host, IP, and Wildcard. When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule.
  • Page 148 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide After selecting the Protocol ID option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-70 Expert ACL (Add Rule) Protocol ID Window...
  • Page 149 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide value in the spaces provided. Destination MAC Address Select and enter the destination information here. Options to choose from are Any, Host, MAC, and Wildcard. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule.
  • Page 150 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-71 Expert ACL (Add Rule) None Window The dynamic fields that can be configured are described below: Parameter Description Fragments Select the Fragments option to include packet fragment filtering.
  • Page 151 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Inner CoS Select the inner Class of Service (CoS) value here. Options to choose from are from 0 to 7. Time Range Enter the time profile name that will be associated with this ACL rule, here.

  • Page 152: Acl Interface Access Group

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 8-73 Expert ACL (Rule Display) Window Click the Delete button to remove the specific ACL rule. ACL Interface Access Group On this page, users can view and configure the ACL interface access group settings. To view the following window, click ACL >...

  • Page 153: Acl Vlan Access Map

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide From Port ~ To Port Select the range of ports that will be used for this configuration here. Action Select the action that will be taken here. Options to choose from are Add and Delete.

  • Page 154: Acl Vlan Filter

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide ACL VLAN Filter On this page, users can view and configure the ACL VLAN filter settings. To view the following window, click ACL > ACL VLAN Filter, as shown below:...

  • Page 155: Security

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Security Trusted Host Trusted Host On this page, users can view and configure the trusted host settings. To view the following window, click Security > Trusted Host, as shown below:...

  • Page 156: 10. Monitoring

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide 10. Monitoring Mirror Settings Traffic Mirror Settings On this page, users can view and configure the mirror feature’s settings. The switch allows users to copy frames transmitted and received on a port and redirect the copies to another port. Attach a monitoring device to the mirroring port, such as a sniffer or an RMON probe, to view details about the packets passing through the first port.

  • Page 157: Traffic

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide to choose from are Port and Remote VLAN. After selecting the Port option, select the destination port number from the second drop-down menu. After selecting the Remote VLAN option, select the destination port number from the seconds drop-down menu and enter the VID in the space provided.

  • Page 158: Traffic Monitoring By Type

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Figure 10-2 Traffic Monitoring by Direction Window The fields that can be configured are described below: Parameter Description Port Select the port number to display. View By Select the View By option here. Options to choose from are Direction, Type, Size, and Error.

  • Page 159: Traffic Monitoring By Size

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Port Select the port number to display. View By Select the View By option here. Options to choose from are Direction, Type, Size, and Error.

  • Page 160: Traffic Monitoring By Error

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Traffic Monitoring by Error On this page, users can monitor traffic, per-port, of a certain error type and direction. After selecting a Port number and then selecting the Error option from the drop-down list, click the Apply button to view...

  • Page 161: 11. Save And Tools

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide 11. Save and Tools Save Configuration Firmware Upgrade & Backup Configuration Restore & Backup Log Backup Reset Reboot System Save Configuration On this page, users can save the running configuration to the start-up configuration. This is to prevent the loss of configuration in the event of a power failure.

  • Page 162: Firmware Upgrade From Tftp

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Click the Upgrade button to initiate the firmware upgrade. Firmware Upgrade from TFTP On this page, users can initiate a firmware upgrade from a TFTP server. To view the following window, click Tools >...

  • Page 163: Firmware Backup To Tftp

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Firmware Backup to TFTP On this page, users can initiate a firmware backup to a TFTP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to TFTP, as shown below:...

  • Page 164: Configuration Restore From Tftp

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide option to restore and overwrite the start-up configuration file on the switch. Click the Restore button to initiate the configuration restore. Configuration Restore from TFTP On this page, users can initiate a configuration restore from a TFTP server. To view the following window, click Tools >...

  • Page 165: Configuration Backup To Tftp

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide the switch here. This field can be up to 64 characters long. Select the running-config option to backup the running configuration file from the switch. Select the startup-config option to backup the start-up configuration file from the switch.

  • Page 166: Log Backup To Tftp

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Log Type Select the log type that will be backed up to the local PC using HTTP.

  • Page 167: Reboot System

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Select the The Switch will be reset to its factory defaults including IP address and stacking information, and then will save, reboot option to reset the switch’s configuration to its factory default settings.

  • Page 168: Appendix A - Password Recovery Procedure

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Appendix A - Password Recovery Procedure This section describes the procedure for resetting passwords on the D-Link DXS-3600 Series switch. Authenticating any user who tries to access networks is necessary and important. The basic authentication method used to accept qualified users is through a local login, utilizing a Username and Password.
  • Page 169 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide...

  • Page 170: Appendix B - System Log Entries

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Appendix B - System Log Entries The following table lists all possible entries and their corresponding meanings that will appear in the System Log of this switch. 802.1X...
  • Page 171 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web, Web(SSL). client-ip: It indicates the client’s IP address if valid through IP protocol. aaa-method: It indicates the authentication method, e.g.: local, server.
  • Page 172 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Event description: This log will be generated when RADIUS assigned a valid VLAN Informational ID attributes. Log Message: RADIUS server <server-ip> assigned VID: <vid> to port <interface- id> (Username: <username>) Parameters description: server-ip: It indicates the RADIUS server IP address.
  • Page 173 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Event description: BGP connection is normally closed. Informational Log Message: BGP-6-NORMALCLOSE: BGP connection is normally closed (Peer:<ipaddr>). Parameters description: ipaddr: IP address of BGP peer. Event description: BGP connection is closed due to error (Error Code, Error Warning Subcode and Data fields Refer to RFC).
  • Page 174 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Log Message: BGP-6-TOTALPFXMAX: The total number of prefix received reaches max prefix limit. Event description: BGP received unnecessary AS4-PATH attribute from new (4- Warning bytes AS) BGP peer Log Message: BGP-4-RCVUNNECEAS4PATH: Received AS4-PATH attribute from new (4-bytes AS) peer.
  • Page 175 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Log Description Severity Event description: Cross-connect is detected Critical Log Message: CFM cross-connect. VLAN:<vlanid>, Local(MD Level:<mdlevel>, Port <[unitID:]portNum>, Direction:<mepdirection>) Remote(MEPID:<mepid>, MAC:<macaddr>) Parameters description: vlanid: Represents the VLAN identifier of the MEP.
  • Page 176 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Local(Port <[unitID:]portNum>, Direction:<mepdirection>) Parameters description: vlanid: Represents the VLAN identifier of the MEP. mdlevel: Represents the MD level of the MEP. unitID: Represents the ID of the device in the stacking system.
  • Page 177 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Event description: LCK condition detected Notice Log Message: LCK condition detected. MD Level:<mdlevel>, VLAN:<vlanid>, Local(Port <[unitID:]portNum>, Direction:<mepdirection>, MEPID:<mepid>) Parameters description: vlanid: Represents the VLAN identifier of the MEP.
  • Page 178 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide unitID: The unit ID. session: The user’s session. username: Represent current login user. ipaddr: Represent client IP address. macaddr : Represent client MAC address. Event description: Firmware uploaded unsuccessfully.
  • Page 179 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide ipaddr: Represent client IP address. macaddr : Represent client MAC address. Log Description Severity Event description: DDM exceeded or recover from DDM alarm threshold Critical Log Message: Optical transceiver <interface-id> [component] [high-low] alarm...
  • Page 180 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide ipv6address: ipv6 address obtained from a DHCPv6 server. ipif-name: Name of the DHCPv6 client interface. Event description: The ipv6 address obtained from a DHCPv6 server renews Informational success.
  • Page 181 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide success. Log Message: The IPv6 prefix < ipv6networkaddr > on interface <intf-name> renews success. Parameters description: ipv6anetworkaddr: IPv6 prefix obtained from a delegation router. intf-name: Name of the DHCPv6 client PD nterface.
  • Page 182 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide DLMS Log Description Severity Event Description: Input an illegal activation code. Informational Log Message: Illegal activation code (AC: <string25>). Parameters Description: <string25>: Activation Code Event Description: License Expired.
  • Page 183 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Dynamic ARP Inspection Log Description Severity Event description: This log will be generated when DAI detect invalid ARP packet. Warning Log Message: Illegal ARP <type> packets (IP: <ip-address>, MAC: <mac- address>, VLAN <vlan-id>, on <interface-id>).
  • Page 184 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide IP Directed-Broadcast Log Description Severity Event description: IP Directed-broadcast rate exceed 50 packets per second on a Informational certain subnet. Log Message: IP Directed Broadcast packet rate is high on subnet. [(IP: <ipaddr>)] Parameters description: IP: the Broadcast IP destination address.
  • Page 185 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Parameters description: nterface-id: Interface on which loop is detected. vlan-id: VLAN on which loop is detected. Event description: Record the event when the number of VLANs that loop back has Critical occurred exceeds a reserved number.
  • Page 186 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide 3. portComponent(3) 4. macAddress(4) 5. networkAddress(5) 6. interfaceName(6) 7. local(7) chassisID: chassis ID. portType: port ID subtype. Value list: 1. interfaceAlias(1) 2. portComponent(2) 3. macAddress(3) 4. networkAddress(4) 5. interfaceName(5) 6.
  • Page 187 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Event description: Login through console successfully. Informational Log Message: [Unit <unitID>, ]Successful login through Console (Username: <username>) Parameters description: unitID: The unit ID. username: Represent current login user.
  • Page 188 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Parameters description: username: Represent current login user. ipaddr: Represent client IP address. Event description: Login through SSH unsuccessfully. Critical Log Message: Login failed through SSH (Username: <username>, IP: <ipaddr>) Parameters description: username: Represent current login user.
  • Page 189 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Event description: the authorized user number on the whole device is below the Warning maximum user limit in a time interval. Log Message: MAC-based Access Control recovers from stop learning state.
  • Page 190 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide MPLS Log Description Severity Event description: LSP is up Informational Log Message: LSP <lsp_id> is up Parameters description: lsp_id: The established LSP ID Event description: LSP is down Informational Log Message: LSP <lsp_id>...
  • Page 191 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide new_status: New status Event description: Spanning Tree port role changed. Informational Log Message: Spanning Tree port role change. [( [Instance:<InstanceID> ], <interface-id>)] <old_role> -> <new_role> Parameters description: InstanceID: Instance ID.
  • Page 192 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Log Message: OSPF-6-INTFSTATECHANGE: OSPF interface <intf-name> changed state to [Up | Down] Parameters description: intf-name: Name of OSPF interface. Event description: OSPF interface administrator state changed. Informational Log Message: OSPF-6-INTFADMINCHANGE: OSPF protocol on interface <intf- name>...
  • Page 193 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Log Message: OSPF-6-STATECHANGE: OSPF state changed to [Enabled | Disabled] Peripheral Log Description Severity Event description: Fan Recovered. Critical Log Message: Unit <id>, <fan-descr> back to normal. Parameters description: Unit <id>: The unit ID.
  • Page 194 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Port Security Log Description Severity Event description: Address full on a port Warning Log Message: MAC address <macaddr> causes port security violation on <interface-id> Parameters description: macaddr: The violation MAC address.
  • Page 195 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Log Description Severity Event description: SSH server is enabled. Informational Log Message: SSH server is enabled Event description: SSH server is disabled. Informational Log Message: SSH server is disabled...
  • Page 196 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Event description: Box ID conflict. Critical Log Message: Hot insert failed, box ID conflict: Unit <unitID> conflict (MAC: <macaddr> and MAC: <macaddr>). Parameters description: unitID: Box ID. macaddr: The MAC addresses of the conflicting boxes.
  • Page 197 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Log Message: <interface-id> is currently shut down due to the <Broadcast | Multicast | Unicast> storm. Parameters description: interface-id: The interface name. Broadcast: The interface is disabled by broadcast storm.
  • Page 198 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide VRRP Debug Enhancement Log Description Severity Event description: One virtual router state becomes Master. Informational Log Message: VRRP-6-STATEMASTER:VR <vr-id> at interface <intf-name> switch to Master Parameters description: vr-id: VRRP virtual router ID.
  • Page 199 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Event description: Advertisement interval mismatch of one received VRRP Warning advertisement message. Log Message: VRRP-4-ADVMIS: Received ADV msg adv interval mismatch. VR <vr-id> at interface <intf-name> Parameters description: vr-id: VRRP virtual router ID.
  • Page 200 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Event description: Failed when adding a virtual MAC into switch L3 table. The port Error where the MAC is learned from is invalid. Log Message: VRRP-3-BADMAC: Failed to add virtual IP <vrrp-ip-addr> MAC <vrrp-mac-addr>...
  • Page 201 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Event description: Login failed through Web. Warning Log Message: Login failed through Web (Username: <username>, IP: <ipaddr>). Parameters description: username: The use name that used to login HTTP server.
  • Page 202 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide username: The host username. ipaddr: The host IP address, either an IPv4 or IPv6 address. mac-address: The host MAC addresses. interface-id: The interface on which the host is authenticated.

  • Page 203: Appendix C - Trap Entries

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Appendix C - Trap Entries The following table lists all possible trap log entries and their corresponding meanings that will appear in the switch. Authentication Fail Trap Name...
  • Page 204 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Binding objects: (1) dot1agCfmMdIndex (2) dot1agCfmMaIndex (3) dot1agCfmMepIdentifier LACP Trap Name Description linkUp A linkUp trap signifies that the SNMP entity, acting in 1.3.6.1.6.3.1. an agent role, has detected that the ifOperStatus 1.5.4...
  • Page 205 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Trap Name Description lldpRemTablesChange A lldpRemTablesChange notification is sent when 1.0.8802.1.1. the value of lldpStatsRemTableLastChangeTime 2.0.0.1 changes. It can be utilized by an NMS to trigger LLDP remote systems table maintenance polls.
  • Page 206 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide linkUp A notification is generated when port linkup. 1.3.6.1.6.3.1. 1.5.4 Binding objects: (1) ifIndex, (2) if AdminStatus (3) ifOperStatu linkDown A notification is generated when port linkdown. 1.3.6.1.6.3.1.
  • Page 207 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide pwDown This notification is generated when the 1.3.6.1.2.1.10 pwOperStatus object for one or more contiguous .246.0.1 entries in the pwTable which are about to enter the down(2) or lowerLayerDown(6) state from any other state, except for transition from the notPresent(5) state.

  • Page 208: Appendix D - Radius Attributes Assignment

    DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Appendix D - RADIUS Attributes Assignment The RADIUS Attributes Assignment on the DXS-3600 is used in the following modules: Console, Telnet, SSH, Web, 802.1X, MAC-based Access Control, and WAC.
  • Page 209 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide authenticates successfully, the device will not assign any bandwidth to the port. If the bandwidth attribute is configured on the RADIUS server with a value of “0”, the effective bandwidth will be set “no_limited”, and if the bandwidth is configured less than “0”...
  • Page 210 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Tag field value String field format 0x01 VLAN name (ASCII) 0x02 VLAN ID (ASCII) Others When the switch receives the VLAN setting string, it will think it is the VLAN ID first.

  • Page 211: Appendix E - Ietf Radius Attributes Support

    RADIUS attributes currently supported by the switch. RADIUS attributes are supported by the IETF standard and Vendor-Specific Attribute (VSA). VSA allows the vendor to create an additionally owned RADIUS attribute. For more information about D-Link VSA, refer to the RADIUS Attributes Assignment Appendix.
  • Page 212 DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide Message-Authenticator Tunnel-Private-Group-ID Acct-Interim-Interval NAS-Port-ID NAS-IPv6-Address RADIUS Accounting Attributes: Number IETF Attribute User-Name NAS-IP-Address NAS-Port Service-Type Framed-IP-Address Calling-Station-ID NAS-Identifier Acct-Status-Type Acct-Delay-Time Acct-Input-Octets Acct-Output-Octets Acct-Session-ID Acct-Authentic Acct-Session-Time Acct-Input-Packets Acct-Output-Packets Acct-Terminate-Cause...

Table of Contents