DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Session Activity : Enabled
Peer Group : my
Remote AS : 1
Local AS : 1
Remote Router ID : 182.148.0.3
BGP State : Established (UP for 00:21:48)
Hold Time (Configured) : 180 Seconds
Hold Time
Keepalive Interval (Configured) : 60 Seconds
Keepalive Interval (Current Used) : 30 Seconds
Advertisement Interval (Configured) : 0 Seconds
Advertisement Interval (Current Used) : 5 Seconds
AS Origination Interval (Configured) : 0 Seconds
AS Origination Interval (Current Used) : 15 Seconds
Connect Retry Interval (Configured) : 0 Seconds
Connect Retry Interval (Current Used) : 0 Seconds
EBGP Multihop : 255
Weight : 0
Update Source : loopback1
Next Hop Self : Disabled
Remove Private As : Disabled
Allowas In : Disabled
Address Family IPv4 Unicast
IPv4 Unicast : Advertised and Received
Soft Reconfiguration Inbound : Disabled
Community Sent to this Neighbor : None
Default Originate : Disabled
Outbound Route Filter (ORF) type (64) Prefix list:
Send Mode : Disabled
Receive Mode : Disabled
Pass Word: (null)
Prefix Count: 0
Send Prefix Count: 1
Prefix Max Count: 12000
Prefix Warning Threshold: 75
Prefix Max Warning: Disabled
Switch#
10-107
debug ip bgp show peer-group
This command is used to display internal detailed information about the BGP peer group.
debug ip bgp show peer-group [vrf VRF-NAME | vpnv4]
Parameters
vrf VRF-NAME
vpnv4
(Current Used) : 90 Seconds
(Optional) Specifies the VRF name. This name can be up to 12
characters long.
(Optional) Specifies to display global parameters in the address family
244