D-Link DXS-3600 Series Reference Manual page 390

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the device's DHCPv6 DUID or use the show ipv6 dhcp interface
command to display DHCPv6 related settings and information for the specified VLAN interface. If the
interface ID is not specified, all interfaces that are enabled for the DHCPv6 function will be displayed.
Example
This example shows how to display the DHCPv6 settings for VLAN 1, which is in the DHCPv6 relay mode.
Switch # show ipv6 dhcp interface vlan1
vlan1 is in relay mode
Relay destinations:
FE80::20A:BBFF:FECC:102 via vlan2
Switch #
This example shows how to display DHCPv6 information for the interface VLAN 1 when VLAN 1 is not in
the DHCPv6 mode.
Switch# show ipv6 dhcp interface vlan1
Vlan1 is not in DHCPv6 mode
Switch#
25-7 show ipv6 dhcp relay information option
This command is used to display settings of the DHCPv6 relay information options.
show ipv6 dhcp relay information option
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the settings of the DHCPv6 relay information options.
Example
This example shows how to display the DHCPv6 relay remote ID setting.
Switch# show ipv6 dhcp relay information option
390