Ethernet Ring Protection Switching (Erps) Commands - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
37. Ethernet Ring Protection Switching (ERPS)
Commands
37-1 description
This command is used to specify a string that serves as a description for a G.8032 Ethernet ring instance.
description DESCRIPTION
Parameters
DESCRIPTION
Default
None.
Command Mode
ERPS Instance Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to set the description string for an ERP instance.
Example
This example shows how to create an ERP instance 1 in the physical ring named "major-ring" and add a
description for the instance.
Switch# configure terminal
Switch(config)# ethernet ring g8032 major-ring
Switch(config-erp)# instance 1
Switch(config-erp-instance)# description
Switch(config-erp-instance)#
37-2 ethernet ring g8032
This command is used to create a G.8032 physical ring and enter the ERP configuration mode. Use the
no form of this command to delete the G.8032 physical ring.
ethernet ring g8032 RING-NAME
no ethernet ring g8032 RING-NAME
Parameters
RING-NAME
Specifies the description for a G.8032 Ethernet ring instance with a
maximum of 64 characters.
major-ring instance 1
Specifies the name of the G.8032 ring with a maximum of 32
characters.
476