D-Link DXS-3600 Series Reference Manual page 922

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This example shows how to display information that has been learned from various C-RPs at the BSR. In
this example, two candidate RPs have sent advertisements for the FF00::/8 or the default IPv6 multicast
range.
Switch# show ipv6 pim bsr rp-cache
PIMv2 BSR C-RP Cache
BSR Candidate RP Cache
Group(s) FF00::/8
RP 3ffe:1000:10:5::153
Priority 192
Uptime: 0DT00H08M36S, expires: 0DT00H01M21S
RP 3ffe:2000:10:5::100
Priority 192
Uptime: 0DT00H08M36S, expires: 0DT00H01M21S
Switch#
This example shows how to display the candidate RP information that had configured on the router.
Switch# show ipv6 pim bsr candidate-rp
PIMv2 C-RP information
Candidate RP: 3ffe:1000:10:5::100(vlan10)
Priority 192, Holdtime 150
Advertisement interval 60 seconds
Next advertisement in 0DT00H00M54S
Switch#
Display Parameters
This system is the Bootstrap
Router (BSR)
BS Timer
78-18 show ipv6 pim group-map
This command is used to display the group to RP mapping information.
show ipv6 pim group-map [IPV6-GROUP-ADDR/PREFIX-LENGTH] [info-source {bsr |
embedded-rp | static}]
Parameters
IPV6-GROUP-ADDR/PREFIX-
LENGTH
info-source
Indicates this router is the BSR and provides information on the
parameters associated with it.
On the elected BSR, the BS timer shows the time in which the next
BSM will be originated. On all other routers in the domain, the BS timer
shows the time at which the elected BSR expires.
(Optional) Specifies the IPv6 multicast group address range.
(Optional) Specifies to display all mappings learned from a specific
922