D-Link DXS-3600 Series Reference Manual page 836

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
LS Seq Number: 80000001
Checksum: 0xd863
Length: 28
Network Mask: /24
TOS: 0
Total Entries: 2
Switch#
71-35 show ip ospf database stub
This command is used to display information about the LSAs in the stub and NSSA areas.
show ip ospf [vrf VRF-NAME] database stub [LINK-STATE-ID | self-originate | adv-router IP-
ADDRESS]
Parameters
vrf VRF-NAME
LINK-STATE-ID
self-originate
adv-router
IP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display information about the LSAs in the stub and NSSA areas.
Example
This example shows how to display information about the LSAs in the stub and NSSA areas.
Switch# show ip ospf database stub
Router Link States (Area 1.1.1.1)
LS age: 1063
Options: 0x2 (*|-|-|-|-|-|E|-)
Flags: 0x3 : ABR ASBR
LS Type: router-LSA
Link State ID: 10.47.65.181
Advertising Router: 10.47.65.181
LS Seq Number: 80000006
Metric: 1
(Optional) Specifies the IPv4 OSPF VRF process.
Specifies the link state ID (as an IP address).
Specifies the self-originated link states.
Specifies to display all the LSAs of the specified router.
Specifies the advertise router IP address
836