D-Link DXS-3600 Series Reference Manual page 482

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to specify the sub-ring of a physical ring. Use the no form of the command to
remove the sub-ring of a physical ring.
sub-ring SUB-RING-NAME
no sub-ring SUB-RING-NAME
Parameters
SUB-RING-NAME
Default
None.
Command Mode
ERP Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Configure a sub-ring connected to another ring. This command is applied on the interconnection node.
Example
This example shows how to configure the physical ring named "ring2" as a sub-ring of "ring1".
Switch# configure terminal
Switch(config)# ethernet ring g8032 ring2
Switch(config-erp)# exit
Switch(config)# ethernet ring g8032 ring1
Switch(config-erp)# sub-ring ring2
Switch(config-erp)#
37-10 profile
This command is used to associate an ERP instance with a G.8032 profile. Use the no form of the
command to remove the association.
profile PROFILE-NAME
no profile PROFILE-NAME
Parameters
PROFILE-NAME
Default
None.
Command Mode
ERP Instance Configuration Mode.
Specifies the sub-ring's name.
Specifies the name of the G.8032 profile to be associated with the
ERP instance.
482