D-Link DXS-3600 Series Reference Manual page 330

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
All interfaces are trusted source of relay agent information option
Switch#
20-17 show ip dhcp relay information option-insert
This command is used to display the relay option insert configuration.
show ip dhcp relay information option-insert
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display relay information options with insert configuration information.
Example
This example shows how to displays relay information Option 82 option and insert configuration
information for all VLANs.
Switch# show ip dhcp relay information option-insert
Interface
------------ ----------
vlan1
vlan2
vlan3
Total Entries: 3
Switch#
20-18 show ip dhcp relay information policy-action
This command is used to display the relay option policy action configuration.
show ip dhcp relay information policy-action
Parameters
Option-Insert
Enabled
Disabled
Not Configured
330