Ip Dhcp Conflict Logging; Clear Ip Dhcp Binding; Clear Ip Dhcp Server Statistics; Clear Ip Dhcp Conflict - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference

ip dhcp conflict logging

This command enables conflict logging on DHCP server.
Default
Format
Mode
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
Mode

clear ip dhcp binding

This command deletes an automatic address binding from the DHCP server database. If "*" is
specified, the bindings corresponding to all the addresses are deleted.
address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Format
Mode

clear ip dhcp server statistics

This command clears DHCP server statistics counters.
Format
Mode

clear ip dhcp conflict

The command is used to clear an address conflict from the DHCP Server database. The server
detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is
used as the address parameter.
Default
Format
Mode

show ip dhcp binding

This command displays address bindings for the specific IP address on the DHCP server. If no
IP address is specified, the bindings corresponding to all the addresses are displayed.
Format
Modes
288 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
enabled
ip dhcp conflict logging
Global Config
no ip dhcp conflict logging
Global Config
clear ip dhcp binding {<address> | *}
Privileged EXEC
clear ip dhcp server statistics
Privileged EXEC
none
clear ip dhcp conflict {<address> | *}
Privileged EXEC
show ip dhcp binding [<address>]
Privileged EXEC
User EXEC
is a valid IP
<address>