D-Link DXS-3600 Series Reference Manual page 509

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Total Entries: 2
Switch#
40-9 show mac-address-table aging-time
This command is used to display the MAC address table's aging time.
show mac-address-table aging-time
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the MAC address table's aging time.
Example
This example shows how to display the MAC address table's aging time.
Switch# show mac-address-table aging-time
Aging Time is 300 seconds
Switch#
40-10 show mac-address-table learning
This command is used to display the MAC-address learning state.
show mac-address-table learning [interface INTERFACE-ID [, | -]]
Parameters
INTERFACE-ID
,
-
(Optional) Specifies the interface to be display.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces before and after the
comma.
(Optional) Specifies a range of interfaces. No spaces before and after
the hyphen.
509