DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on the BGP route map debug switch option. When the route map matches the
BGP route information, debug information will be printed if the BGP debug function is turned on. Use the
command debug ip bgp to turn on the BGP debug function.
Example
This example shows how to turn on the BGP route map debug switch option.
Switch# debug ip bgp route-map
Switch#
Route-Map:<you>, Apply Suppressed Route, Neighbor <100.1.1.4, AFI/SAFI 1/1>,
Prefix:<67.1.1.0/24> <Permit>
Route-Map:<my>, Apply Received route, Neighbor <100.1.1.2, AFI/SAFI 1/1>,Prefix:
<88.1.1.0/24> <Deny>
10-104
debug ip bgp prefix-list
This command is used to turn on the BGP IP prefix list debug switch option. Use the no form of this
command to turn off the BGP IP prefix list debug switch option.
debug ip bgp prefix-list
no debug ip bgp prefix-list
Parameters
None.
Default
By default, the BGP IP prefix list debug switch option is turned off.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on the BGP IP prefix list debug switch option. When the IP prefix list matches
the BGP information, debug information will be printed if the BGP debug function is turned on. Use the
command debug ip bgp to turn on the BGP debug function.
Example
This example shows how to turn on the BGP IP prefix list debug switch option.
Switch# debug ip bgp prefix-list
Switch#
Prefix-List:<my>, Apply Received route, Neighbor <100.1.1.2, AFI/SAFI 1/1>,
Prefix:<88.1.1.0/24> <Permit>
241