D-Link DXS-3600 Series Reference Manual page 673

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to display the each physical interface's LLDP traffic information.
show lldp traffic interface INTERFACE-ID [, | -]
Parameters
INTERFACE-ID
,
-
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays LLDP traffic on each physical interface.
Example
This example shows how to display statistics information of port 1.
Switch#show lldp traffic interface ethernet 1/0/1
Port ID : eth1/0/1
---------------------------------------------
Total Transmits
Total Discards
Total Errors
Total Receives
Total TLV Discards
Total TLV Unknows
Total Ageouts
Switch#
Display Parameters
Total Transmits
Total Discards
Total Errors
Total Receives
Total TLV Discards
Total TLV Unknowns
Specifies the interface ID.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces before and after the
comma.
(Optional) Specifies a range of interfaces. No spaces before and after
the hyphen.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
The total number of LLDP packets transmitted on the port.
The total number of LLDP frames discarded on the port for any reason.
The number of invalid LLDP frames received on the port.
The total number of LLDP packets received on the port.
The number of TLVs discarded.
The total number of LLDP TLVs received on the port where the type
673