DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Total entries: 2
Switch#
This example shows how to display detailed information of group FF1E::330E:32.
Switch# show ipv6 mld proxy group FF1E::330E:32
FF1E::330E:32, Include
Source list: 100::1
Total Entries: 1
Switch#
62-7 show ipv6 mld proxy forwarding
This command is used to display multicast forwarding entries created by the MLD proxy function.
show ipv6 mld proxy forwarding [GROUP-ADDRESS]
Parameters
GROUP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display all MLD proxy forwarding information by not specifying the group address.
Example
This example shows how to display the forwarding information created by the MLD proxy function.
Switch# show ipv6 mld proxy forwarding
FF1E::330E:32, 2000::2, vlan52
outgoing interface:
vlan20, vlan30
FF1E::EC20:1, 100::1, vlan52
outgoing interface:
vlan20
Total Entries: 2
Specifies the IPv6 multicast address.
694