Show Ip Dhcp Binding - D-Link DGS-6600-48TS Manual

DGS-6604 m

show ip dhcp binding

show ip dhcp binding [pool NAME] [ADDRESS]
Syntax Description
ADDRESS
pool NAME
Default
Command Mode
Usage Guideline
Examples
switch# show ip dhcp binding
Pool Name: pool1
IP address Hardware address
---------- ----------------
10.1.1.1 00b8.3493.32b5
Pool Name: pool2
IP address Hardware address
---------- ----------------
10.1.1.1 00b8.3493.32b5
10.1.9.1 00b8.3493.32b5
10.1.11.10 00b8.3493.32b5
Switch#
switch# show ip dhcp binding pool pool2
IP address Hardware address
---------- ----------------
10.1.1.1 00b8.3493.32b5
10.1.9.1 00b8.3493.32b5
10.1.11.10 00b8.3493.32b5
CLI Reference Guide
To display the current status of address bindings on the DHCP Server.
(Optional) Specifies the IP address of the DHCP client for which the bindings will
be displayed. If no IP address is specified, all bound IP addresses are applied for
this command.
(Optional) Specifies the pool name for the conflict IP address. If no pool name is
specified, all of the pools are applied for this command.
None
User EXEC or any configuration mode
If the address is not specified, all address bindings are shown. Otherwise, only
the binding for the specified client is displayed. The IP address, hardware
address, Lease expiration and assigned type will be included in the displayed
format.
The following example shows the binding status of all bound IP addresses.
Lease start
--------------------
18:38:56, 2010-09-30
Lease start
--------------------
18:38:56, 2010-09-30
18:38:56, 2010-09-30
. 18:38:56, 2010-09-30
The following example shows the binding status of the entire address pool2,
Lease start
--------------------
18:38:56, 2010-09-30
18:38:56, 2010-09-30
18:38:56, 2010-09-30
show ip dhcp binding
Lease expiration
--------------------
18:38:56, 2010-10-1
Lease expiration
--------------------
18:38:56, 2010-10-1
18:38:56, 2010-10-1
18:38:56, 2010-10-1
Lease expiration
--------------------
18:38:56, 2010-10-1
18:38:56, 2010-10-1
18:38:56, 2010-10-1
623