Show Dhcp Binding - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Parameters
<pool_name 12> - Specify the DHCP pool name to clear.
<ipaddr> - Specify the IP address to clear.
all - Specify to clear all IP addresses.
all - Specify to clear all DHCP pool names and IP addresses.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear dynamic binding entries in the pool named "engineering":
DGS-3120-24TC:admin#clear dhcp binding dhcppool01 10.20.3.4
Command: clear dhcp binding dhcppool01 10.20.3.4
Success.
DGS-3120-24TC:admin#

26-20 show dhcp binding

Description
This command is used to display dynamic binding entries.
Format
show dhcp binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Specify a DHCP pool name.
Restrictions
None.
Example
To display dynamic binding entries for "engineering":
DGS-3120-24TC:admin#show dhcp binding engineering
Command: show dhcp binding engineering
Pool Name IP Address
------------ --------------- ----------------- -------- --------- -------------
engineering 192.168.0.1
engineering 192.168.0.2
engineering 192.168.0.3
engineering 192.168.0.4
Hardware Address Type
00-80-C8-08-13-88 Ethernet Manual
00-80-C8-08-13-99 Ethernet Automatic
00-80-C8-08-13-A0 Ethernet Offering
00-80-C8-08-13-B0 Ethernet BOOTP
324
Status Lifetime
86400
38600
-
Infinite