D-Link DXS-3600 Series Reference Manual page 664

Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays each physical interface's local LLDP information currently available for populating
outbound LLDP advertisements.
Example
This example shows how to display the local information of port 1 in detailed mode.
Switch# show lldp local interface ethernet 1/0/1 detail
Port ID: eth1/0/1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Port PVID
Management Address Count
Address 1 : (default)
Subtype
Address
IF Type
OID
Address 2 :
Subtype
Address
IF Type
OID
PPVID Entries Count
(None)
VLAN Name Entries Count
Entry 1 :
VLAN ID
VLAN Name
Protocol Identity Entries Count
(None)
MAC/PHY Configuration/Status
Auto-Negotiation Support
Auto-Negotiation Enabled
Auto-Negotiation Advertised Capability : 8000(hex)
Auto-Negotiation Operational MAU Type
normal mode.
: MAC Address
: 00-01-02-03-05-00
: D-Link DXS-3600-16S 2.00.012
Port 1 on Unit 1
: 1
: 2
: IPv4
: 10.90.90.90
: IfIndex
: 1.3.6.1.4.1.171.10.118.2
: IPv4
: 10.90.90.90
: IfIndex
: 1.3.6.1.4.1.171.10.118.2
: 0
: 1
: 1
: default
: 0
:
: Supported
: Enabled
: 0000(hex)
664

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxs-3600-32s

Table of Contents