D-Link DXS-3600 Series Reference Manual page 530

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Usage Guideline
Use this command to display upstream interface configurations and downstream interfaces.
Example
This example shows how to display the IGMP proxy configurations on the device.
Switch# show ip igmp proxy
IGMP Proxy Global State:
Upstream Interface:
Downstream Interface:
vlan11, vlan12(DF), vlan13(DF)
Switch#
43-6 show ip igmp proxy group
This command is used to display multicast groups learned by the IGMP proxy function.
show ip igmp proxy group [GROUP-ADDRESS]
Parameters
GROUP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display all group information by not specifying the group address.
Example
This example shows how to display the groups learned by IGMP proxy function.
Switch# show ip igmp proxy group
224.2.2.2, Exclude
Source list: 1.2.2.3, 1.3.3.8
227.3.1.5， Include
Source list: 3.2.3.9
Total entries: 2
Switch#
Enabled
vlan14
Specifies the IPv4 multicast address.
530