D-Link DXS-3600 Series Reference Manual page 645

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
all
INTERFACE-ID
,
-
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
If this command is issued without the interface keyword, all neighboring information on all interfaces will
be cleared.
Example
This example shows how to clear all neighboring information on all interfaces.
Switch# clear lldp table all
Switch#
58-3 lldp dot1-tlv-select
This command is used to specify which optional type-length-value settings (TLVs) in the IEEE 802.1
Organizationally Specific TLV set will be transmitted and encapsulated in the LLDPDUs and sent to
neighbor devices. To disable the transmission of TLVs, use the no form of this command.
lldp dot1-tlv-select {port-vlan | protocol-vlan VLAN-ID [, | -] | vlan-name [VLAN-ID [, | -]] |
protocol-identity [PROTOCOL-NAME]}
no lldp dot1-tlv-select {port-vlan | protocol-vlan [VLAN-ID [, | -]] | vlan-name [VLAN-ID [, | -]] |
protocol-identity [PROTOCOL-NAME]}
Parameters
port-vlan
protocol-vlan
VLAN-ID [, | -]
Specifies to clear LLDP neighboring information for all interfaces.
Specifies the interface's ID.
(Optional) Specifies a series of physical interfaces. No spaces before
and after the comma.
(Optional) Specifies a range of physical interfaces. No spaces before
and after the hyphen.
Specifies the port VLAN ID TLV to send. The Port VLAN ID TLV is an
optional fixed length TLV that allows a VLAN bridge port to advertise
the port's VLAN identifier (PVID) that will be associated with untagged
or priority tagged frames.
Specifies the Port and Protocol VLAN ID (PPVID) TLV to send. The
PPVID TLV is an optional TLV that allows a bridge port to advertise a
port and protocol VLAN ID.
Specifies the ID of the VLAN in the PPVID TLV. The VLAN ID range is
1 to 4094. Separate nonconsecutive VLAN IDs with a comma. Use a
hyphen to designate a range of VLAN IDs. In the no form of this
command, the VLAN ID is optional. If no VLAN ID is specified, all
configured PPVID VLANs will be cleared and no PPVID TLV will be
645