DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the configured ARP aging time.
Example
This example shows how to display the ARP aging time.
Switch# show arp timeout
Interface
----------------------------------------
vlan100
vlan200
Total Entries: 2
Switch#
8-10 show ip interface
This command is used to display the IP interface information.
show ip interface [INTERFACE-ID] [brief]
Parameters
INTERFACE-ID
brief
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Specifies the interface ID.
Timeout (minutes)
30
40
(Optional) Specifies to display information for the specified IP interface.
(Optional) Specifies to display a summary of the IP interface
information.
125