D-Link DXS-3600 Series Reference Manual page 704

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The command is only available for VLAN interface configuration.
Example
This example shows how to configure the query version to be 1 on VLAN 1000.
Switch# configure terminal
Switch(config)# vlan 1000
Switch(config-vlan)# ipv6 mld snooping query-version 1
Switch(config-vlan)#
63-12 ipv6 mld snooping rate-limit
This command is used to configure the upper limit per second for ingress MLD control packets. Use the
no form of this command to disable the rate limit.
ipv6 mld snooping rate-limit NUMBER
no ipv6 mld snooping rate-limit
Parameters
NUMBER
Default
By default, this option is disabled.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The command is available for VLAN interface configuration, physical port or port-channel interface. The
command configures the rate of MLD control packet that is allowed per interface.
Example
This example shows how to limit 30 packets per second on interface VLAN 1000.
Switch# configure terminal
Switch(config)# vlan 1000
Switch(config-vlan)# ipv6 mld snooping rate-limit 30
Switch(config-vlan)#
Specifies to configure the rate of the MLD control packet that the
switch can process on a specific interface. The rate is specified in
packets per second.
704