D-Link DXS-3600 Series Reference Manual page 78

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command configures the TCP port number for the HTTP server.
Example
This example shows how to configure the HTTP TCP port number to 8080.
Switch# configure terminal
Switch(config)# ip http service-port 8080
Switch(config)#
5-9 ip telnet server
This command is used to enable a Telnet server. And use the no command to disable the Telnet server
function
ip telnet server
no ip telnet server
Parameters
None.
Default
By default, this option is enabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command enables or disables the Telnet server. The SSH access interface is separately controlled
by SSH commands.
Example
This example shows how to enable the Telnet server.
Switch# configure terminal
Switch(config)# ip telnet server
Switch(config)#
5-10 ip telnet service port
This command is used to specify the service port for Telnet. Use the no command to return the service
port to 23.
78