D-Link DXS-3600 Series Reference Manual page 497

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Default Level
Level: 1.
Usage Guideline
If URL is not specified, the current directory is used. By default, the current directly is located at the root
of the file system located at local flash. The storage media is mounted in the file system and appears to
the user as a sub-directory under the root directory.
The supported file systems can be displayed as the user issues the dir command for the root directory.
The storage media that is mapped to the file system can be displayed by using the show storage media
command.
Example
This example shows how to display the root directory in a standalone switch.
Switch# dir /
Directory of /
1 d--
2 d--
0 bytes total (0 bytes free)
Switch#
39-4 format
This command is used to format the external storage device.
format FILE-SYSTEM [fat32 | fat16]
Parameters
FILE-SYSTEM
fat32
fat16
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Only the external storage can be formatted. The selected storage will be formatted to FAT32 file system
by default.
Example
This example shows how to format an external Compact Flash card.
0 Jun 31 2013 17:49:36
0 Jun 31 2013 18:42:53
Specifies the file system.
(Optional) Specifies to format to the FAT32 file system. This is the
default format.
(Optional) Specifies to format to the FAT16 file system.
497
c:
d: