Show Nlb Fdb - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
set as the NLB multicast MAC address. NLB entry 01:00:5E:xx:xx:xx (IPv4 multicast mapped MAC
address) has higher priority.
Example
This example shows how to add a multicast address 01-F3-22-0A-12-F4 received on VLAN 1 candidate
forwarding ports eth2/0/1 to eth2/0/5 to the NLB multicast address table.
Switch# configure terminal
Switch(config)# nlb multicast-fdb 01-F3-22-0A-12-F4 vlan 1 interface eth2/0/1-5
Switch(config)#

70-3 show nlb fdb

This command is used to display NLB configured entries.
show nlb fdb
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display NLB configured entries, including unicast and multicast entries.
Example
This example shows how to display NLB configured entries, including unicast and multicast entries.
Switch# show nlb fdb
MAC Address
----------------- ----------
00-F3-22-0A-12-F4 -
01-F3-22-0A-12-F4 1
Total Entries : 2
Switch#
VLAN ID Interface
----------------------------------
eth 1/0/1-1/0/5
eth 1/0/6-1/0/9
803