D-Link DXS-3600 Series Reference Manual page 346

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
no ip dhcp use class
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to specify the DHCP server to use DHCP classes during address allocation or the
DHCP relay agent to use DHCP classes to locate the relay destination addresses. Use the no command
to disable the use of DHCP classes.
Example
This example shows how use of the DHCP class is disabled.
Switch# configure terminal
Switch(config)# no ip dhcp use class
Switch(config)#
21-19 lease
This command is used to configure the duration of the lease for an IP address that is assigned from the
address pool. Use the no form of this command to restore the default setting.
lease {DAYS [HOURS [MINUTES]] | infinite}
no lease
Parameters
DAYS
HOURS
MINUTES
infinite
Default
By default, the lease time is 1 day.
Command Mode
DHCP Pool Configuration Mode.
Command Default Level
Level: 12.
Specifies the number of days for the duration of the lease.
(Optional) Specifies the number of hours for the duration of the lease.
(Optional) Specifies the number of minutes for the duration of the
lease.
Specifies that the lease time is unlimited.
346