D-Link DXS-3600 Series Reference Manual page 852

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
.0.. .... = O: O Bit Isn't Set
0... .... = 7 Bit Isn't Set
LS Sequence Number: 0x80000001
Length: 36
Flags: 0x0
.... ...0 = B: NO Area Border Router
.... ..0. = E: NO AS Boundary Router
.... .0.. = V: NO Virtual Link Endpoint
Number Of Links: 1
Type: Stub
Internal Field:
Del_flag: 0x0
Rxtime: 0
Current Time: 10
Switch#
71-54 debug ip ospf show request-list
This command is used to display current LSA information of the internal OSPF request list.
debug ip ospf show request-list
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to check the information about LSAs that OSPF is requesting to neighbors
Example
This example shows how to display current requested LSAs.
Switch# debug ip ospf show request-list
OSPF Request List:
*Area 0.0.0.0:
Circuit: 1.1.1.1
Neighbor: 90.2.0.1
LSID: 192.194.134.0
LSID: 192.194.135.0
LSID: 192.194.136.0
LSID: 192.194.137.0
ID: 10.1.1.0
I_ref_count: 0 Seq: 0x80000001
Txtime: 0 Orgage: 0
IP: 1.1.1.2
RTID: 90.2.0.1
RTID: 90.2.0.1
RTID: 90.2.0.1
RTID: 90.2.0.1
Data: 255.255.255.0
Csum: 0x4d28
852
Metric: 1