D-Link DXS-3600-EM-8XS Hardware Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. DXS-3600-EM-8XS
  6. Hardware installation manual
D-Link DXS-3600-EM-8XS Hardware Installation Manual

D-Link DXS-3600-EM-8XS Hardware Installation Manual

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-EM-8XS:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual

Hardware Installation Guide

Product Model: DXS-3600 Series
Layer 2/3 Managed 10GbE Switch
Release: 1.10

Advertisement

Table of Contents
loading

Related Manuals for D-Link DXS-3600-EM-8XS

Summary of Contents for D-Link DXS-3600-EM-8XS

  • Page 1: Hardware Installation Guide

    Hardware Installation Guide Product Model: DXS-3600 Series Layer 2/3 Managed 10GbE Switch Release: 1.10...
  • Page 2 Information in this document is subject to change without notice. Reproduction of this document in any manner whatsoever, without the written permission of the D-Link Corporation, is strictly forbidden. Trademarks used in this text: D-Link and the D-Link logo are trademarks of the D-Link Corporation; Microsoft and Windows are registered trademarks of the Microsoft Corporation.

  • Page 3: Intended Readers

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Intended Readers The DXS-3600 Series Hardware Installation Guide contains detailed information about the hardware specifications of a switch in this series. It also contains brief information on how to configure and manage a switch in this series. This manual is intended for advanced level users that are familiar with network management concepts and terminology.

  • Page 4: Safety Cautions

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Safety Cautions To greatly reduce the risk of physical injury, electrical shock, fire, and damage to equipment, observe the following precautions. Observe and follow service markings. • Do not attempt to service any product, except when it is explained in the system’s documentation. •...

  • Page 5: General Precautions For Rack-Mountable Products

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide • 115V/60Hz is used mostly in North and South America as well as Far Eastern countries like as South Korea and Taiwan • 100V/50Hz is used mostly in Eastern Japan and 100V/60Hz in Western Japan •...

  • Page 6: Table Of Contents

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Table of Contents Intended Readers ............... . ii Typographical Conventions.

  • Page 7: Introduction

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Introduction Switch Description Package Contents Features Front Panel Components Rear Panel Description Side Panel Description Switch Description The DXS-3600 Series switch is a switch designed to meet the needs and requirements Data Center networks that require Top-of-Rack access switches and Enterprise/Campus aggregation switches, where low latency and high bandwidth capacity is essential.

  • Page 8: Features

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide If any item is missing or damaged, please contact your local D-Link reseller for replacement. Features This switch is action packed with an abundance of networking features that span inside and outside of the traditional Layer 3 framework.

  • Page 9: Front Panel Components

    • DXS-3600-EM-4XT (Four 10GBASE-T Copper ports). • DXS-3600-EM-8T (Eight 1000BASE-T Copper ports). • DXS-3600-EM-4QXS (Four 40Gbps QSFP+ transceiver slots). • DXS-3600-EM-8XS (Eight 10Gbps SFP+ transceiver slots). • DXS-3600-EM-Stack (Two 120Gbps CXP Stacking ports). This module can only be used with the DXS-3600-32S.

  • Page 10: Led Indicators

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide LED Indicators Located on the front panel of the switch are LED indicators: Power1, Power2, MGMT, Console, Fan1, Fan2, Fan3, and SD. Additionally, the DXS-3600-32S also has a Seven segment stacking ID LED. For each SFP+ port there is a Link/ Act light.

  • Page 11: Rear Panel Description

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Description Link/Act LEDs This LED will light solid green when there is a secure connection to a 10Gbps Ethernet device at any of the ports. This LED will light solid orange when there is a secure connection to a 1Gbps Ethernet device at any of the ports.

  • Page 12: Power Supply Module

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Power Supply Module Connect the one end of the AC power cord supplied to the AC power connector and the other end into a properly grounded electrical outlet. The switch will automatically adjust the power setting to adapt to any voltage supply in the range from 100~240VAC at 50~60Hz.

  • Page 13: Installation

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Installation Installation Guidelines Installing the Switch without a Rack Installing the Switch into a Rack Installing Transceivers into the Transceiver Ports Installing Power Modules into the Power Module Ports Installing Fan Modules into the Fan Module Ports Installation Guidelines This section will discuss the hardware installation guidelines that the user must follow in order to properly and safely install this switch into the appropriate environment.

  • Page 14: Installing The Switch Into A Rack

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Make sure that there is proper heat dissipation from and adequate ventilation around the switch. Leave at least 10 cm (4 inches) of space at the front and rear of the switch for ventilation. Installing the Switch into a Rack This section is used to guide the user through installing the switch into a switch rack.

  • Page 15: Installing Transceivers Into The Transceiver Ports

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Make sure that there is adequate space around the Switch to allow for proper air flow, ventilation, and cooling. Installing Transceivers into the Transceiver Ports The switch is equipped with small form-factor pluggable plus (SFP+) ports that can be used to connect various other networking devices to this switch that do not support the standard copper wiring connection.

  • Page 16: Installing An Ac Power Module

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide NOTE: The Power Modules all support a specific air-flow direction. This air-flow direction must be the same as the Fan Module installed. By default the air-flow direction of the Power Module and Fan Module installed is front-to-back.

  • Page 17: Installing A Dc Power Module

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Installing a DC Power Module This switch supports a unique dual power input feature. Connect the one end of the DC power cord supplied to a DC power source (-48VDC/5.2A), that will be activated when the AC power is not working. Please make sure that connection polarity (positive and negative) is correct before using this feature to avoid any damaged.

  • Page 18: Installing Fan Modules Into The Fan Module Ports

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide If you are installing a DC-powered switch, you must ground the chassis before connecting the switch to the DC power source, following the following instructions: • Use a minimum of 18 AWG stranded copper wire for grounding. The wire should be long enough to reach from the installed switch to the facility ground point.

  • Page 19: Switch Connections

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Switch Connections Switch to an End Node Switch to another Switch Switch to a Server Switch to an End Node End node is a generic name for edge networking devices that will be connected to this switch. Typical examples of end nodes are Personal Computers (PCs), Notebooks, Access Points, Print Servers, VoIP Phones and more.

  • Page 20: Switch To A Server

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Figure 3-2 Connecting a Switch to another switch by means of SFP/SFP+ Switch to a Server When configuring a network, users will most likely have to add a server or two to this switch. Generally, any port on this switch can be used to connect to a server, as they all operate at a maximum speed of one 10Gbps.

  • Page 21: Switch Management

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Switch Management Management Options Connecting to the Console Port Connecting using SNMP Connecting using the Web User Interface Management Options This switch provides multiple access platforms that can be used to configure, manage and monitor networking features available on this switch.
  • Page 22 DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Set the terminal emulation software as follows: • Select the appropriate serial port (COM1 or COM2). • Set the data rate to 115200 baud. • Set the data format to 8 data bits, 1 stop bit, and no parity.

  • Page 23: Connecting To The Switch For The First Time

    Upon initial connection to the switch, the login screen appears (see example below). DXS-3600-32S TenGigabit Ethernet Switch Command Line Interface Firmware: Build 1.10.023 Copyright(C) 2012 D-Link Corporation. All rights reserved. User Access Verification Username: Figure 4-4 The Switch’s Login Screen By default, there is no Username and Password configured in the account settings of this switch.

  • Page 24: Configuring The Ip Address

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide DXS-3600-32S>enable DXS-3600-32S#configure terminal DXS-3600-32S(config)#username NewUser password 12345 DXS-3600-32S(config)#username NewUser privilege 15 DXS-3600-32S(config)#line console DXS-3600-32S(config-line)#login local DXS-3600-32S(config-line)#end DXS-3600-32S# Figure 4-5 To create a user account 1 At the CLI command prompt, enter the command ‘enable’ to enter the Privileged EXEC Mode. Press Enter. 2 Enter the command ‘configure terminal’...

  • Page 25: Connecting Using Snmp

    The SNMP agent updates the MIB objects to generate statistics and counters. D-Link provides a professional network management software package, called D-View 6.0 that uses SNMP to connect, configure, manage and monitor this switch. The D-View® 6.0 SNMP Network Management System is a software tool that facilitates the central administration of a network with various SNMP-enabled devices.

  • Page 26: Traps

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide NOTE: For customers interested in D-View, D-Link Corporation's proprietary SNMP management software, go to http://dview.dlink.com.tw/ and download the software and manual. Managed devices that support SNMP include software (referred to as an agent), which runs locally on the device. A defined set of variables (managed objects) is maintained by the SNMP agent and used to manage the device.

  • Page 27: Management Information Base (Mib)

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide traps and sends them to the trap recipient (or network manager). Typical traps include trap messages for Authentication Failure, and Topology Change. Management Information Base (MIB) The Management Information Base (MIB) stores management and counter information. The switch uses the standard MIB-II Management Information Base module.

  • Page 28: Areas Of The User Interface

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Enter the User name and Password and click OK to proceed. This will open the Web-based User Interface. The switch management features available in the Web-based manager are explained below. Areas of the User Interface After a successful connection to the Web User Interface has been made, the following page should be displayed.

  • Page 29: Appendix A - Technical Specifications

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Appendix A - Technical Specifications Product Specifications Switch Series DXS-3600-16S: 8-Port 10Gigabit SFP+, Expandable, Layer 2/3 switch. DXS-3600-32S: 24-Port 10Gigabit SFP+, Expandable, Layer 2/3 switch. Dimensions DXS-3600-16S: 440mm (W) x 506mm (D) x 44mm (H), 19-inch, 1U Rackmount size DXS-3600-32S: 440mm (W) x 506mm (D) x 44mm (H), 19-inch, 1U Rackmount size Weight DXS-3600-16S: 9.89kg (21.8lb)
  • Page 30 DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Port Specifications Console Port RJ-45 interface for out-of-band CLI configuration Copper Ports Compliant to following standards: (10/100/1000Mbps) • IEEE 802.3 compliance For DXS-3600-EM-8T and • IEEE 802.3u compliance DXS-3600-EM-4XT • IEEE 802.3ab compliance •...
  • Page 31 DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Port Specifications SFP+ Direct Attached Cables (DAC): • Direct Attached Cables are cables with a built-in SFP+ transceivers at both ends. • DEM-CB100S (10GbE SFP+ 1m Direct Attach Cable) • DEM-CB300S (10GbE SFP+ 3m Direct Attach Cable) •...
  • Page 32 DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide LED Indicators Location Color Status Description LED Per Port Link/Act/Speed Green Light on (Solid) When there is a secure connection (or link) to (10/100/1000Mbps) 1000Mbps Ethernet device at any of the ports. Light blinking When there is reception or transmission of data...

  • Page 33: Appendix B - Cables And Connectors

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Appendix B - Cables and Connectors Ethernet Cable When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagrams and tables show the standard RJ-45 receptacle/connector and their pin assignments.

  • Page 34: Console Cable

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Console Cable A console cable is used when a user want to connect to the console port, of the switch, to access the command line interface. The following diagrams and tables show the standard Console-to-RJ45 receptacle/connector and their pin assignments.

  • Page 35: Warranty

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Warranty...

  • Page 36: Technical Support

    DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide Technical Support...

This manual is also suitable for:

Dxs-3600-em-4xtDxs-3600-32sDxs-3600-16sDxs-3600 series

Table of Contents