D-Link DXS-3600 Series Reference Manual page 978

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
•
ip - IP (version 4).
•
ipv6 - IP (version 6).
•
netbios - NetBIOS.
•
nfs - Network File System.
•
ntp - Network Time Protocol.
•
ospf - Open Shortest Path First.
•
pppoe - Point-to-Point Protocol over Ethernet.
•
rip - Routing Information Protocol.
•
rtsp - Real-Time Streaming Protocol.
•
ssh - Secured shell.
•
telnet - Telnet.
•
tftp - Trivial File Transfer Protocol.
Example
This example shows how to specify a class map called "class-home-user" and configures the access list
named "acl-home-user" to be used as the match criterion for that class.
Switch# configure terminal
Switch(config)# class-map class-home-user
Switch(config-cmap)# match access-group name acl-home-user
Switch(config-cmap)#
This example shows how to specify a class map called "cos" and specifies that the CoS values of 1, 2,
and 3 are match criteria for the class.
Switch# configure terminal
Switch(config)# class-map cos
Switch(config-cmap)# match cos 1,2,3
Switch(config-cmap)#
This example shows how classes called voice and video-n-data are created to classify traffic based on
the CoS values. QoS treatment is then given to the appropriate packets in the cos-based-treatment policy
map (in this example, the QoS treatment is a single rate policer and a two rate policer for class voice and
video-n-data respectively). The service policy configured in this example is attached to Ethernet interface
3.1.
Switch# configure terminal
Switch(config)# class-map voice
Switch(config-cmap)# match cos 7
Switch(config-cmap)# exit
Switch(config)# class-map video-n-data
Switch(config-cmap)# match cos 5
Switch(config-cmap)# exit
Switch(config)# police-map cos-based-treatment
Switch(config-pmap)# class voice
Switch(config-pmap-c)# police 8000 1000 exceed-action drop
Switch(config-pmap-c)# exit
Switch(config-pmap)# class video-n-data
Switch(config-pmap-c)# police cir 500000 bc 10000 pir 1000000 be 10000 exceed-action
set-dscp-transmit 2 violate-action drop
Switch(config-pmap-c)# exit
Switch(config-pmap)# exit
Switch(config)# interface eth3/0/1
Switch(config-if)# service-policy input cos-based-treatment
Switch(config-if)#
978