DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the upstream interface configurations and downstream interfaces.
Example
This example shows how to display the MLD proxy configurations on the device.
Switch# show ipv6 mld proxy
MLD Proxy Global State:
Upstream Interface:
Downstream Interface:
vlan11, vlan12(DF), vlan13(DF)
Switch#
62-6 show ipv6 mld proxy group
This command is used to display multicast groups learned by the MLD proxy function.
show ipv6 mld proxy group [GROUP-ADDRESS]
Parameters
GROUP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display all group information by not specifying group address.
Example
This example shows how to display the groups learned by the MLD proxy function.
Switch# show ipv6 mld proxy group
FF1E::330E:32, Exclude
Source list: 2000::2, 2000::3
FF1E::EC20:1, Include
Source list: 100::1
Enabled
vlan14
Specifies the IPv6 multicast address.
693