D-Link DXS-3600 Series Reference Manual page 213

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Network
Next Hop
Metric
LocPrf
Weight
Path
10-78 show ip bgp community
This command is used to display routes that belong to specified Border Gateway Protocol (BGP)
communities.
show ip bgp {ipv4 unicast | vpnv4 {all | rd RD-VALUE | vrf VRF-NAME}] community COMMUNITY
[exact]
Parameters
ipv4
vpnv4
unicast
all
rd RD-VALUE
vrf VRF-NAME
COMMUNITY
exact
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
? - Origin of the path is not clear.
The IP address of a network.
The IP address of the next router to forward the packet.
The value of the inter-autonomous system metric.
The local preference value.
The weight of the route.
The AS path to the destination network.
(Optional) Specifies to display the IPv4 address family routing entries.
(Optional) Specifies to display the VPNv4 address family routing
entries.
Specifies to display unicast address family routing entries.
(Optional) Specifies to display all the VPNv4 routing entries.
(Optional) Specifies to display the VPNv4 routing entries that match
the specified RD.
(Optional) Specifies to display the VPNv4 routing entries associated
with the VRF.
Specifies the community as a 32-bit integer. It can be a user-specified
number represented by AA:NN, where AA (AS number) is the upper
part of the word and NN (community number, user-specified) is the
lower part of the word. Multiple numbers (separated by space) can be
specified.
It can also be one of the following reserved community:
internet: Specifies routes free to be advertised to all peers.
local-as: Specifies not to send out of the local AS or sub autonomous
system of a confederation.
no-advertise: Specifies not to advertise the route to other BGP peers.
no-export: Specifies not advertise to external peers.
(Optional) Specifies that an exact match is required. All of the
communities and only those communities specified must be present.
213