Show Mpls Ldp Statistic - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch#
This example shows how to display LDP session statistics for peer 10.1.1.2.
Switch# show mpls ldp session peer 10.1.1.2 statistic
Peer 10.1.1.2
-------------------------------------------
Notification Message
Initialization Message
Keep Alive Message
Address Message
Address Withdraw Message
Label Mapping Message
Label Request Message
Label Withdraw Message
Label Release Message
Label Abort Message
Total Entries: 1
Switch#
67-40

show mpls ldp statistic

This command is used to display LDP global statistic information.
show mpls ldp statistic
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display LDP global statistic information.
Example
This example shows how to display LDP global statistic information.
Switch# show mpls ldp statistic
SessionAttempts
SessionRejectedNoHelloErrors :
: TX 10/RX 2
: TX 2/RX 2
: TX 100/RX 100
: TX 1/RX 1
: TX 0/RX 0
: TX 2/RX 1
: TX 2/RX 1
: TX 0/RX 0
: TX 0/RX 0
: TX 0/RX 0
: 0
0
777