Debug Ip Bgp Show Redistribution - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to check the internal status and detailed information of the BGP timer.
Example
This example shows how to display internal detailed information about the BGP timer.
Switch# debug ip bgp show timer
BGP timer Link:
Node
--------
481f9ef8
480f4410
48135368
481760c8
481b6e28
481f7b88
481fdf14
481f9f14
480f442c
48135384
481760e4
Switch#
10-113

debug ip bgp show redistribution

This command is used to display internal detailed information about BGP route redistribution.
debug ip bgp show redistribution [vrf VRF-NAME]
Parameters
vrf VRF-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Time Func
------ --------
1 80ca052c
1 80ca052c
1 80ca052c
1 80ca052c
1 80ca052c
1 80ca052c
1 80c98f34
1 80ca0710
1 80ca0710
1 80ca0710
1 80ca0710
(Optional) Specifies the VRF name. This name can be up to 12
characters long.
250