D-Link DXS-3600 Series Reference Manual page 531

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
43-7 show ip igmp proxy forwarding
This command is used to display multicast forwarding entries created by the IGMP proxy function.
show ip igmp proxy forwarding [GROUP-ADDRESS]
Parameters
GROUP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display all proxy forwarding information by not specifying the group address.
Example
This example shows how to display the forwarding information created by the IGMP proxy function.
Switch# show ip igmp proxy forwarding
237.1.1.0, 100.52.1.10, vlan52
outgoing interface:
vlan20, vlan30
237.1.1.1, 100.52.1.10, vlan52
outgoing interface:
vlan20
Total Entries: 2
Switch#
Specifies the IPv4 multicast address.
531