D-Link DXS-3600 Series Reference Manual page 771

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Usage Guideline
This command displays the interfaces on which LDP neighbor has been discovered.
Example
This example shows how to display all MPLS LDP neighbors.
Switch# show mpls ldp discovery
Local LDP Identifier: 10.1.1.1:0
Discovery Sources:
Interfaces:
VLAN 10 (ldp): xmit/recv
LDP Id: 172.23.0.77:0
VLAN 20 (ldp): xmit/recv
LDP Id: 192.18.0.15:0
Targeted Hellos:
10.1.1.1 -> 10.133.0.33 (ldp): active, xmit/recv
LDP Id: 10.133.0.33:0
10.1.1.1 -> 172.18.30.2 (ldp): passive, xmit/recv
LDP Id: 172.18.30.2:0
Switch#
67-34 show mpls ldp information
This command is used to display LDP global information.
show mpls ldp information
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display LDP global information.
Example
This example shows how to display LDP global information.
Switch# show mpls ldp information
LSR ID
LDP Version
LDP State
: 3.3.3.3
: 1.0
: Enabled
771