D-Link DXS-3600 Series Reference Manual page 323

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Level: 12.
Usage Guideline
This command is used to select different vendor's remote ID format or configures a user-defined string of
ASCII characters to be the remote ID.
Example
This example shows how to use vendor2 as the remote ID.
Switch# configure terminal
Switch(config)# ip dhcp relay information option
Switch(config)# ip dhcp relay information option format remote-id vendor2
Switch(config)#
This example shows how to configure a user-defined string "switch1" as the remote ID.
Switch# configure terminal
Switch(config)# ip dhcp relay information option
Switch(config)# ip dhcp relay information option format remote-id string switch1
Switch(config)#
20-9 ip dhcp relay information option format circuit-id
This command is used to configure the DHCP information circuit ID sub-option. Use the no form of the
command to configure the default circuit ID sub-option.
ip dhcp relay information option format circuit-id {default | string STRING | vendor1}
no ip dhcp relay information option format circuit-id
Parameters
default
STRING
vendor1
Default
The circuit ID format is VLAN ID, module number and port number.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to select different vendor's circuit ID format or configures a user-defined string of
ASCII characters to be the circuit ID.
Example
This example shows how to use vendor1 as the circuit ID.
Specifies to use the default circuit ID sub-option.
Specifies to use a user-defined string as the circuit ID. Space
characters are allowed in the string.
Specifies to use vender1.
323