Lacp System-Priority; Lacp Timeout - Dell PowerConnect 8024 Cli Reference Manual

lacp system-priority

Use the lacp system-priority command in Global Configuration mode to configure the Link
Aggregation system priority. To reset to default, use the no form of this command.
Syntax
lacp system-priority
no lacp system-priority
value — Port priority value. (Range: 1–65535)
•
Default Configuration
The default system priority value is 1.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the system priority to 120.
console(config)#lacp system-priority 120

lacp timeout

Use the lacp timeout command in Interface Configuration mode to assign an administrative
LACP timeout. To reset the default administrative LACP timeout, use the no form of this
command.
Syntax
lacp timeout {long|short}
no lacp timeout
• long — Specifies a long timeout value.
short — Specifies a short timeout value.
•
Default Configuration
The default port timeout value is long.
338
LACP Commands
value