Address Transmit-Delay - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

address transmit-delay

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
Syntax
transmit-delay transmDelay
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the estimated time it takes to transmit a link-state update packet on the interface.
Description
The no version restores the default value.
NOTE: You must issue the address area command before issuing this command.
Options
Router Configuration
Mode
106
address transmit-delay
ipAddress OSPF interface address previously specified with the address
command
unnumbered Indicates that OSPF is running on an unnumbered interface
previously specified with the address command
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
transmDelay Link-state transmit delay, a number in the range 0–3600 seconds;
default value is 1 second