Committed-Burst - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

committed-burst

committed-burst { size | millisecond milliseconds }
Syntax
no committed-burst
Command introduced before JUNOSe Release 7.1.0.
Release Information
milliseconds variable added in JUNOSe Release 8.1.0.
Sets the committed burst for a rate limit profile. The no version restores the default
Description
value, 100 ms; if 100ms is less than 8K, then 8K (8192).
Options
Rate Limit Profile Configuration
Mode
Related Topics
444
committed-burst
size—Size in bytes in the range 1–4294967295
milliseconds Milliseconds in the range 1–10000
Creating a Two-Rate Rate-Limit Profile