Clock Summer-Time Recurring - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

clock summer-time recurring

clock summer-time name recurring [ { startWeekNumber | startWeekEnum }
Syntax
startDay startMonth startTime { stopWeekNumber | stopWeekEnum }
stopDay stopMonth stopTime [ dstOffset ] ]
no clock summer-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the router to automatically switch to summer time (Daylight Saving Time) on
Description
the specified dates every year. The no version configures the software not to
automatically switch to summer time.
Options
Global Configuration
Mode
438
clock summer-time recurring
name Name of the time zone (for example, EDT for Eastern Daylight Savings
Time) to be displayed when daylight saving (summer) time is in effect
recurring Indicates that summer time should start and end on the specified
days every year
startWeekNumber DST start week of the month (1–5)
startWeekEnum First week in month (first); or last week in month (last)
startDay DST start day of the week (Sunday, Monday, ...)
startMonth DST start month (January, February, ...)
startTime DST start time (24-hour format) in hours and minutes (hh:mm)
stopWeekNumber DST stop week of the month (1–5)
stopWeekEnum First week in month (first); or last week in month (last)
stopDay DST stop day of the week
stopMonth DST stop month
stopTime DST stop time in hours and minutes (hh:mm)
dstOffset Number of minutes to add during summer time in the range 1–1440;
default = 60