Class-Int - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 4: C Commands

class-int

class-int vcClassName
Syntax
no class-int [ vcClassName ]
Command introduced in JUNOSe Release 7.3.0.
Release Information
When issued from Interface Configuration mode, assigns a previously configured VC
Description
class to an ATM major interface. When issued from Subinterface Configuration mode,
assigns a previously configured VC class to a static ATM 1483 subinterface. Issuing
this command applies the set of attributes in the specified VC class to the ATM data
PVCs statically or dynamically created on the ATM major interface or ATM 1483
subinterface. The no version removes the VC class association with the interface or
subinterface, and causes the router to set the PVC attributes to their systemwide
default values, or to the values set in the associated VC class with the next highest
order of precedence.
vcClassName Name of the VC class configured with the vc-class atm command
Options
Interface Configuration, Subinterface Configuration
Mode
357
class-int