Baseline Ip Dhcp-Local - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

baseline ip dhcp-local

baseline ip dhcp-local [ interface interfaceType interfaceSpecifier ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a baseline for DHCP local server statistics. The router implements the baseline
Description
by reading and storing the statistics at the time the baseline is set and then subtracting
this baseline whenever baseline-relative statistics are retrieved. There is no no version.
Options
Privileged Exec
Mode
232
baseline ip dhcp-local
interfaceType One of the following interface types listed in Interface Types and
Specifiers on page 5
atm
fastEthernet
gigabitEthernet
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5