Aps Events - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

aps events

aps events list [ list ]*
Syntax
no aps events
Command introduced in JUNOSe Release 7.2.0.
Release Information
Enables line modules to deliver APS events to the necessary SNMP traps. You can
Description
configure notification for specific events. The no version disables the delivery of APS
events from line modules to SNMP traps.
Options
Global Configuration
Mode
list One of the following APS events:
all Configures notification of all APS events
channel-mismatch Configures notification of APS channel mismatches
feplf Configures notification of APS far-end protection line failures
mode-mismatch Configures notification of APS mode mismatches
psbf Configures notification of APS protection signal byte failures
switchover Configures notification of APS switchovers
* Indicates that one or more parameters can be repeated multiple times
in a list in the command line
Chapter 2: A Commands
115
aps events