Adjustment-Factor - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

adjustment-factor

adjustment-factor dslType value
Syntax
no adjustment-factor dslType
Command introduced in JUNOSe Release 9.1.0.
Release Information
Configures an adjustment factor that is applied globally to the ANCP-reported
Description
downstream and upstream data rate for all subscribers of a particular DSL line type.
The adjusted data rate results in an accurate QoS shaping rate. The no version restores
the default, wherein the rate is not adjusted.
Options
L2C Configuration
Mode
dslType Type of DSL subscriber line for which the data rate is adjusted by the
specified QoS adjustment factor: adsl1, adsl2, adsl2+, vdsl, vdsl2, or sds
value QoS adjustment factor applied to upstream or down stream data rates
for the DSL type; a percentage in the range 1–100
Chapter 2: A Commands
107
adjustment-factor