Aaa Tunnel Ignore - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

aaa tunnel ignore

aaa tunnel ignore { nas-port | nas-port-type } { enable | disable }
Syntax
no aaa tunnel ignore { nas-port | nas-port-type }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies whether to use the tunnel peer's NAS-Port [5] and NAS-Port-Type [61]
Description
attributes. The no version negates the command or restores the default of enable.
Options
Global Configuration
Mode
70
aaa tunnel ignore
nas-port Configures the tunnel peer's supplied nas-port value
nas-port-type Configures the tunnel peer's supplied nas-port-type value
enable Implements the feature; this is the default setting
disable Disables the feature