Setting The System Time Zone; Setting The Date And Time - Alcatel OMNISWITCH 7000 Getting Started Manual

All subsequent login sessions—including those through the
console port—will require the new password in order to access
the switch.
User Accounts. The switch allows a maximum of 50 user
accounts in the local user database. For information on
creating additional user types and assigning individual
passwords, refer to the Switch Management Guide.

Setting the System Time Zone

The switch's default time zone is UTC (also referred to as
Greenwich Mean Time).
If you require a time zone that is specific to your region—or if
you need to enable Daylight Savings Time (DST) on the
switch—you can configure these settings via the system time-
zone and system daylight savings time commands. For exam-
ple, to set the system clock to run on Pacific standard time,
enter the following command.
-> system timezone pst
To enable Daylight Savings time, enter the following
command.
-> system daylight savings time enable
Many other time zone variables are supported. For detailed
information on configuring a time zone for the switch, refer to
your Switch Management Guide.
24 Your First Login Session

Setting the Date and Time

Set the current time for the switch by entering system time,
followed by the current time in hh:mm:ss. For example:
-> system time 18:35:00
The switch uses a 24-hour clock; the time value shown in the
above example would set the time to 6:35 PM.
To set the current date for the switch, enter system date,
followed by the current date in mm/dd/yyyy. For example:
-> system date 06/27/2004
March 2005