General Settings; Time And Date; Format; Setting - Siemens Synco RMZ792 Series Basic Documentation

Annual clock
Available time formats
24 h
am / pm

Setting

Note
Note
Siemens
Building Technologies
8

General settings

8.1

Time and date

The bus operator unit does not have its own annual clock. The bus operator unit
assumes and displays time of day, weekday, and date if sent from another bus
participant (clock time master). A clock time master is required in a Synco 700
control unit to correctly operate timer, calendars, etc.
8.1.1

Format

The following time formats are available:
• The date is displayed as dd.mm.yyyy (day.month.year).
Example: 31.05.2006
• The time is displayed as hh:mm (hours:minutes).
Example: 15:56
• The date is displayed as mm/dd/yy (month/day/year).
Example: 05/31/06
• The time is displayed as hh:mm am/pm (hours:minutes am/pm).
Example: 03:56 pm
Main menu > Settings > Device
Operating line
Time format
Time and date are always displayed in the format of the bus operator unit regardless
of the settings of other bus operator units.
8.1.2 Setting
Use the bus operator unit to adjust the clock time master's system time and thus the
local display for time and date.
Main menu > Time of day/date
Operating line
Time of day
Date
Year
The master provides the clock time if the KNX network contains a clock time master
(standard). If the clock time is adjusted on the bus operator unit, the master assumes
the new time; the master then provides this time to all KNX network devices.
The bus operator unit sets the clock time if no clock time master is available
(exception). In this case, the time may deviate several minutes per day, as it is not
synchronized to a quartz clock.
Bus operator unit RMZ792 Series B
8 General settings
Range
24 hours
12 hours (am / pm)
Range
00:00...23:59 /
12:00am...11:59pm
01.01...31.12
2000...2080
Factory setting
24 h
Factory setting
39/58
CE1P3113en
07.07.2011