Q3920 EOT 3G TO 4G CONVERSION
_________________________________________________________________________________________________________
6. Enter a "1" for the value data and select "OK".
7. Now close the Registry Editor and open the 16371 utility. The extra buttons should now
display.
Figure 1-14 PUMP Utility Screen with all Functions Displaying
1.3.2
Set EOT to "True Colors" to Load New Software
1. Click on the "Comm_Setup" button in the PUMP utility window.
2. Configure the communication settings as shown below and then exit the Comm_Setup
window.
The Comm Port should be set to the communication port of the PC being
used. The setting may differ from COM1.
OBE-00-22-01
Version No.: A.1
Figure 1-13 Edit String Window
1-12
NOTE
JANUARY 2022